Search results for query: *

Correct. They replied to me in an email when we found out about the shorter shroud that: "It's hard to find a case for the boss" ... They don't want to make a seperate case fot the fx boss anymore so they just cut a piece of the fx boss so it would fit in one of their standard cases.

Just a quick question? Is the FX boss so much more expensive in the USA than over here in Europe? 2000 dollars seems like a lot

It's louder. But I'm not sure if it shoots groups worse than the old version. I just don't know :(

Yes i see now, somewhere during it's lifetime it received a regulator. I have no idea when that happened, thanks for clarification https://www.airgunnation.com/threads/fx-royale-400-adding-a-huma-regulator.1314575/

Did you furiously try to lower the regulator with pressure in the bottle or something? Like, very often?

Mine creeps about 5 bars but only if the outside pressure is more than 50 bars higher. The higher the pressure in the bottle the more creep i have.

Does that sit on the white piece of plastic? Looks really really damaged but i'm not sure how that could have happened?

...always had a regulator. @Airgun Al After someone in my shooting group tried my FX boss at his range (because i couldn't get it to group for sh*t) he noticed mine was shorter. Measured it, 5cm shorter. Barrel is same length. I email FX about this, like "wtf why did you do this" except...

The newer bosses are shorter. FX cut a piece of the shroud (about 5cm/2 inches) so the air rifle can fit in their standard case and they have 1 less case type to manufacture. (costs) So the new bosses sound like crap (shrilly or what's the word for it...) and i think they're less accurate too...

...and only benchrest.... I'm just going to parrot what i heard about pressure and hammer spring and mix in my own opinion because i don't know **** but ... As far as i can tell, there's two trains of thought: 1) About 90-95% of hammer spring tension (around 3.2 to 3.5 on the adjuster?) with...

60 bars seems incredibly low. No matter how soft the hammer hits that the valve will open wide and long and that might explain your lack of fps change. I'd start with 110 bars , hammer at 1 and just up the hammer untill desired speed is reached. Results will be a lot more logical i bet with a...


I saw a youtube where this mexican guy "alvarez" was shooting it. It was terrible, and he isn't a bad shot . Too bad kalibrgun didn't go for a .30 instead i guess :( 

What should i expect @ 100 yards ? (accuracy) I can only find ONE accuracy test, and it's not good :(

I heard he enchants his pellets with a +7 agility spell .

Fair enough. 

Well i'll be damned, they changed the mechanism :D ... Ok then ... Anyway, OP glad it's sorted. p.s: ​"I'm Dutch as well..." So what ? What's your point 

rofl dude with all due respect but try opening your eyes :D Something broke off :D That long tube screw @ the end, it's supposed to be screwed in the piece that broke off. It should be seperated from the trigger mechanism, not jammed in it. It's for setting your safety guard if i remember...

Sightron SIII 10-50x

Guys guys chill out ... I don't even have an impact. I have a boss and i shoot sub MOA groups all the time . (front rest only, but INSIDE no wind) @ 110 yards (100 mtr) . I am just interested in the abilities of tuning of this rifle, i would like a guide of how to approach setting it up, IF i...


A "competitor" ? In the flashy world of air gunning ? Main prize money, 5000 dollar. Once a year. This isn't formula 1 mr Roberts :D:D And isn't that what his youtube channel is for ? Giving tips ? Are you saying he's not going to anymore, because now he's a "competitor" ?