Search results for query: *

You'll need to show us what you're pushing on. There should be two things inside the shroud, some spacer more towards the middle of it and the baffle system at the very end of it.

My first thought is the barrel isn't pushed in all the way but my barrel has a very small gap like yours. I think mine* might be smaller. Does the magazine click into place fine? Is your barrel supported by a barrel band and if so, is that secured to the stock?

Thanks! I have full confidence in them, Brok was amazing with my last problem.

Hey guys, just a little update on my experience with the RTI Mora. It's been great so far, except for this bit. Seems that the screws I got sent with that secure the M-Lok Shield to the gun might be a little shallow. The hole is about 7.3mm deep but the screws only go about 3.2mm in depth...

Make sure the barrel is seated and the set screws are installed and snug. I set mine to 15in/lbs. Grab a bunch of rubber bands and wrap them around the shroud. This should give you the grip needed to get the shroud off. Mine was also on super-duper tight. It does need to be turned...

You'll need to depressurize and take the stock off first before taking out the regulator. Other than that, Air Venturi has some guides on the rifle on youtube but for the regulator it's just unscrewing a black screw that will keep the regulator from being fully unscrewed when adjusting, then...

I also own an avenge-x and had this same issue with my .22. It was accurate and then after a thousand or so shots the groups widened and were moving everywhere. Here's what fixed it for me: Try depressurizing and take out the regulator. Be sure to take a pic of the regulator's washers and note...

If anyone is wanting to print this themselves, here is a link to the STL file: https://www.printables.com/model/1006229-rti-mora-cheek-rest-5mm

It's pretty quiet without the moderator, supremely quiet with.

Oh. Well, yeah never mind thanks for letting me know about the carbon fibers thing. Guess I'll be skipping the carbon fiber stuff. I'm sure it's harmless, it is carbon after all, but I don't need that being embedded into my face. I'll probably go with white PLA or making this design with PCTG...

If I were to do this again I would have canceled my pre-order for sure, and if you're right-handed I would not bother with the Mora. It also didn't even come with a manual, I'm still waiting on that. I don't see much gained over the FX Impact Mk IV for instance, just a much bigger plenum for...

Yes, supposed to have been, at the very least shipped, late August but I have yet to receive communication regarding that. I think Talon Tunes might also be missing the cheek rests as their photos don't include it. I'm also seeing a post by Air Rifle Activities on Youtube having his gun posed...

Eh, feels great to me

This will be my final design. If there's no issues when it prints I think I'm going to force myself to quit it here haha!

I've been told at the beginning of August that I would be having the cheek rest for the Mora by the end of the month. I have yet to receive any emails regarding it being shipped as of this writing, September 3rd, so I decided to make one myself. Managed to find the right screws (M4x0.70x6mm) at...

Oh ok, I just need to worry about getting the valve slightly open then. That's good to know because I was concerned that I was having the valve close before the projectile left the barrel to control the speed. So I just need the hammer to be strong enough for the initial open then close the...

Can confirm the case is exceptional and quite solid! But I also see the guns in the pictures don't have their cheek rests?

I'll have to look up videos or info about their assisted valve then. I'm holding off on emailing RTI about it since I don't want to waste more of Rok's time fiddling about with something that can be explained with a manual.

The problem is sorted, yes. Just had to pop out the plastic bit by inserting 4mm allen wrench from the bottom and give it a good thwack with the hammer. The accuracy is pretty great it only likes the H&N slugs. I've tried the FX Hybrids, Javelin, JSB Knockout, NSA, and Zan slugs from 850 to...

RTI seems to be very good, especially with Rok putting up with all of my emails. Even answered me from his phone on the weekend. The .shop however, eh. They're not able to send me the correct adjustment screw apparently. I'm still waiting to hear back from Rok on my previous email from this morning.