Search results for query: *

No, I have not tried changing it. I believe there is a tool that helps in removal but I cannot recall. I am sure if you go to youtube and search FX air bottle valve assembly. You will find videos on how to fully disassemble.

I let the o-ring sit in hot water for a few minutes so it becomes soft. Then use a o-ring pick tool to seat it in the valve. I use this one: https://www.amazon.com/gp/product/B07Y8QWX9B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It will take a few tries to get it to work but any type of...

Glad to hear you got it all working. Odd why someone put in two o-rings.

The o ring in the front of the valve is a 9.3 x 2.4 NBR 90 durometer https://fxairguns.com/wp-content/uploads/2020/03/airbottle-200326.pdf Here you can see all the o-rings

I have an MK3 and if i lean the rifle against anything even the slightest amount of pressure against the barrel causes a half inch to 1 inch shift horizontal for me. So now I store it on a caldwell rest when not using and the poi does not shift. Just be mindful of something when buying this...

I will experiment this weekend

Yours is a .22 cal?

Thanks! Solid advice

Hello fine people of Airgun Nation, Need advice on setting up a good tune for low power on my .30 FX Wildcat MK3. Current tune is set-up with settings below: Barrel Length: 600mm Hammer Weight: 13gram Rear regulator: 120bar Front Regulator: 160bar Power wheel at Max setting Results: 44.75...

Some neosporin and that bird should heal up fast! Jokes aside, good kill. I use my .30 Wildcat mk3 on starlings and house sparrows. Total overkill but it gets the job done

I used the following video for timing. Again it does not go into too much detail about how forward it should be. But I followed it pretty closely and it took care of my timing issues/fps drop from my initial tests.

I did that and it has certainly helped!

I will have to take a closer look. I took out the hammer and spring last weekend to clean up everything. It cant hurt to take a second look and lube it properly.

I bought a used Wildcat MK3 in .30 cal. It exhibit a similar pattern. I would fill the bottle to 250 bar and shoot it down to 120 (second reg set to this) and somewhere around the middle of my shooting string I had 3-4 shots that were 25-30 fps lower than the average.

This listing has been renewed

Avoid buying used (unless it is 50% less than retail price), I would get new. Any issues on these high end guns can become expensive to fix so unless the used one is discounted deeply, I would stick with new. Like others above have noted, why is the person selling their gun? Do they have too...

This listing has been renewed

Update: If any of you saw my other thread. I went through a mess to get the Wildcat working because the threads on the front bottle adapter and the bottle valve were cross threaded. Anyway, I put a new bottle adapter (https://utahairguns.com/product/fx-dream-tac-dream-lite-bottle-adapter/) and...

https://www.amazon.com/dp/B0000DCVZL?ref=ppx_yo2ov_dt_b_product_details&th=1&psc=1 Can this be used on the CS3 piston as well?

I use the Napier Pull thru cleaning kit. Works really well and no chance of breaking it while pulling through the barrel.