Search results for query: *

Once I get a shot on paper and the rifle isn't scattering them, then it's not too hard. I just measure the holdover with my reticle and dial the correct amount of clicks. After you're pretty much dead-on, you can shoot a group and make a final adjustment. My avenger has been giving me practice...

Hi, I'm looking for a good condition Snowpeak P35x preferably in .22 (might consider .177) PM me if you've got an extra😉 Thanks

Personally, I like the normal way. When I shoot prone with a bipod I like to have my left hand under the butt of the stock with or without a rear bag. I can keep my hold and just reload with my right hand. Otherwise I'd have to go up and down with my left hand. And if I'm shooting offhand with a...

Sounds like that's what I'll probably do. As far as accuracy goes, my notos, avenger and G9 all match up quite good but a cheap handpump I had earlier showed about 1k to high at 3k psi

The tank pressure gauge on my avenger gave out a few days ago. First thing I noticed was that my hand pump gauge wasn't nearly matching up with the gun gauge (It did earlier). Also the force required to pump suggested that the pump's gauge was correct. The pump gauge also matches quite closely...

This listing has been renewed

There's a few different pellets I want to try for the tune I have now (JSB 18 @890 fps). I think I'll post the results once I have them. Thanks for the input so far

I have an avenger so in my case it would have to be on the same tune. Once when I had the reg all the way up and the hammer spring all the way in I tried shooting a group with cphp and was surprised at how accurate they were still. I don't remember measuring and I don't think I have a picture...

I'm curious if anyone has tried having an air rifle set up to shoot 2 (or more) different pellets on the same tune (e.g. JSB 18.13gr @885fps + hades 15.89 @ 930? fps) Or maybe if your rifle has a high/low adjustable transfer port, have high set up for slugs and low for pellets. Any insight or...

Not sure if it's correct but I was told that tanks are tested at 5/3 the operating pressure. So for a 7k tank that would be 11,667 psi

I think the first accessory you'll want is probably a scope

Very informative. It's not as visible but there's a second smaller indent which would make sense. I like to tighten stuff down so it's tightened down. Sometimes so much so that something strips. I'll have to be a bit more gentle I guess

Ok this was luck (I was trying to hit chest but here's the details; Air Venturi Avenger in diy stock Riton X3 Conquer 6-24x50 JSB 18.13 gr 112 yards

Speaking of the avenger barrel here's a picture showing an imperfection in mine about 2 inches from the breech end. I not sure if I made it when hammering out a jam with the first thing I could find which were some welding rods or if it came that way. It still shoots pellets fine, maybe because...

Thanks a lot for your response @EmptyTin_Tim! That's exactly what I wanted. Also your test results match up with bits that I've read elsewhere.

I guess the accuracy I get with pellets has me spoiled. With CPHPs I was happy when I got a 1.5 moa group at 50yd and with JSB 18.13 gr I'm satisfied if I get 1 moa at 50 yd (5 shot groups). My goal with slugs would to shoot 75-100yd. If I only wanted to shoot till 50yd I'd probably just stick...

Ok so yeah NSA has a sale right now and I'm interested. Have you had good accuracy with them in the avenger .22? Which ones and what diameter? I read somewhere that the 20.2 gr .216 do good. I'm particularly interested in the 17.5 gr. Any experience with those? With those then I'd try shooting...

I have the cheapest one I could find that had s-lock (a must have imo) and a sling stud adaptor included. I think it's a knockoff of a Harris. I've removed the whole tensioning system and and can bolt it directly to the adaptor. So far it has worked decently fine although I've had to fix some...

This listing has been renewed

Looks like AGD is trying to make it good with their customers lol