Search results for query: *

one more thing. be sure your diopter is set correctly.. it would be nice if the knob was calibrated but as others have said as long as it will snap in just get it marked , also isnt this a new design from delta? I am wanting one of these too but Im waiting til they have been out awhil. the 5-50...

I would sure email them back and ask if they knew an air rifle recoiled both ways.

signature zee there are zee and signature zee . I dont have any problem removing them but they do have to be slid down the rail. its a nice system only the signature zee has inserts the zee doesnt. if you are planning to take the scope off and on alot I would go a different direction. I use...

what speed are you shooting these slugs or wht is your hammer setting and regulator setting

I just bought a leupold mark 4 4-14 that has moa turret and their tmoa recticle in mils. I just use the center cross hair and dial the 1/4 moa amount . If you sight it in and then see where it hit with the mil recticle you may be able to use the sub stensions in the scope without dialing...but...

burris signature zee rings have inserts in them that allow for 5 10 20 thousandths raising or lowering the scope plus it keeps the ring marks off the scope. you can go up on the rear alittle and down on the front alittle. Its best to get the cross hairs optically centered and move the scope til...

stryker and tenmile are about the same price not sure why you saw 1200 dollars difference....recticles make a difference for sure

the trijicon tenmile is the same as the stryker. the warranty may be better from trijicon either way these are are really good optics

orcair 3-9 with 10 yard parralax on amazon for 49.99

how did you chamber it? the factory barrel has a notch in it to line up the transfer port perfectly but you really dont need that , just a witness mark, looks really good. Except now I want one except I dont have a way to chamber it.

when a manufacturer sets out to build a scope there are two basic premises . one is i am going to build the best scope i can or two i am going to build the best scope I can for x amount of dollars. And those ones that build a scope for x amount usually an attribute to put more money in,i e...

cameraland has these for 350 second focal plane . I have trouble seeing small recticles especially ffp scopes has some one looked thru this? if so is it real thin? looks real thin to me

cant get gxpumps to accept my address amazon discs dont seem to be 6.7mm.

for some reason I cannot figure out gxpumps will not complete my paypal order is there anywhere to buy discs in usa? target forge had them for cs2 cs3 but cs4 not listed thanks

I would call precision pellet . located in PA where ever you send it it will probably be 100 or more

i had an airforce in my cart and the coupon was removed looks like h&n and umarex on sale today

it dont take much force to slightly bend a scope and it can give you a fit trying to figure out what is wrong

how do you check for a slow leak I have used soapy water on stuff other than air rifles you could see it making bubbles where it was leaking

in

in