Search results for query: *

The Snowpeak M40 has been mentioned. Then there´s a Kral or two as well. I´ve got the rifle version, one of them, but there´s certainly bullpup ones as well. Issue with those though is that they´re basically stonewalled at like 40J

...goes that brought the gun back to working as should. What i´m saying is that when it comes to porting these guns thread gently and carry a BIG *ss gun! To be blunt what really needs to be done is run an aluminium so called weld rod down the stock transfer port set with Loctite and then a new...

Here we go, cause that is the unrestricted valve body. Replace it and replace it now. There´s several tutorials on YT how to if you feel way in over your head.

Btw. As i note, this is a REALLY long gun. By FAR the longest pcp i´ve got. With a mod attached the thing sure doesn´t grow shorter by any measure, why it should be noted as it becomes of a downright cumbersome length. Would I have been happier with this one built as a bullpup? No doubt, yes...

Right. So i was told that for this particular model Hatsan had gotten their *hit together. Well. Spoiler alert, not so. As sorts of a review then, i guess. Sniper Long. As in a loooooooong gun, make no mistake. Flaw or a feature? Well, i guess it´s massive size will increase sales? You tell...

Not knowing the X version, while being very familiar with the 15 and 35 (as well as the M-16 which uses the same setup) something´s amiss here - as has been noted. 120 bar might be on the low side for any appreciable level of performance but should non the less suffice way beyond what you´re...

Mm. Recently got its big brother... ...and it´s been one WILD ride getting all the quirks out of it. Actually took a decent amount of machining and downright fabrication to get there, but now it´s at least running well. Shoots well enough (it´s been claimed that these sport LW barrels stock?)...

What´s more it´s also very much a matter of where in the world you´re at. Here in Europe the use of moderators on airguns is rarely even legislated, at all. Powder burners, yes. Airguns not so much and i can´t but agree on your opinions. An airgun is indeed very often used where powder burners...

Nah. Although a couple of yrs back by now, port the thing and throw a 100cc plenum at it and it´ll wake up. Truth be told though i´ll stick to my Meta Premium. A way later design by Rex, and it shows like.. everywhere.

Holy thread revival i guess but to answer your question, yes. The thread on the bottle is the nowadays common M18*1.5 Stock carbon fibre bottle is one on 700cc´s however so why want to replace it?

Mm. Tell you what, as many other ideas it came to evolve... and see this here is where it ended up. This thing heads into the chamber just upstreams of the actual poppet and seat and is now on approx 70cc+. It will happily suffice for anything i throw at it, but as you can gather this is a...

FWIW Mike. When into hardened steels and stainless the drill bits to use are cut on a 135deg angle vs regular HSS on 118. This difference in cutting angle is what delivers so to say, and such drill bits ain´t really all that much more expensive than the regular HSS stuff. What to remember when...

...it. Simple n rugged in short terms. On the earlier guns it´s rather common with broken loading levers as is it with poppet stems that looks like a d*mn Z after a No of firings. That being said though... I pulled the plug completely on one in 25cal and the thing just simply delivers. Granted...

Yeah. So to bring everybody up to speed. Yes that´s an external plenum and yes that´s the Reximex NYX in case. In other words the mods pulled can just as well be performed on a Benjamin Gunnar too. More to it than meets the eye though. The thing now sports a PEEK seal on a 2mm dia shank for...

Not exactly my first rodeo, been doing the 25s and up that way for quite a while. Works rather well, but in all honesty to a large degree depending on caliber.

Nope. Not even close.

...i work on guns.. might be able to hand a bit of insight. If there´s anything specific, just ask. Yes. Barrel is threaded to the main block via a M12*1 thread. This is also where you set end gap. Ie; turn the barrel in until the cylinder can´t be rotated by hand anymore and then just a smidge...

...Point is that it is a Turkish brand alright (which isn´t exactly a good thing from a history POV) but one where they´ve actually gotten their s*it together. It is a modern design, based on a receiver block. It is very very rugged and simple to the build while still of very good quality...

True. Most do though, with a bit of detective work invested. These days most of the both Chinese n Turkish crop guns offered run at least semi fast twists at the very least, which from a twist aspect will work with most commonly available slugs. However. As you bring up, and ain´t that the...

You measure the diameter of the pill shoved through the bore to get an exact measurement of what grooves n lands tell. Now. For a gun sporting a choke this means that you first up remove the small o-ring within the breech, that´s there to seal vs the probe. This just not to ruin it as you use a...