Search results for query: *

Try sending a text or email to Utah Airguns. Their Service Dept. is outstanding and usually answers the same day or latest the next.

Is this the part you are looking for? https://gxpumpofficial.com/collections/accessories/products/black-diaphragm-rubber-disc-for-cs4-grease-pot Please share how you lost the original.

This may be what you are looking for. I have read good things about this particular battery powered compressor but have no experience: (https://gxpumpofficial.com/collections/portable-pump/products/gx-l3-18v-lithium-battery-pcp-air-compressor-4500psi-320bar-32mpa-set-pressure-auto-shutoff ) ...

Well I'll be damned. Trucker3578 that is exactly the thing I discovered when looking at and working to fix my non cocking Wildcat. Yep, the hammer spring adjustment screw must have backed itself out durring my time tuning for slugs. A little bit of Vibra-tite should stop that from happening...

Something strange happened to my Wildcat this moring during a session working up a simple tune for 28 -> 32gr slugs. While shooting well for the first couple of groups, suddenly the rifle, while being cocked, would not engage the trigger sear - caused me to multi-load several pellets because...

Here are three YouTube videos dealing with the FX Impact M3 leak detection and repair: 1) 2) 3) Atached is a schematic and parts list from FX for the Impact M3 I suggest you watch the videos and keep the schematic on hand as you look for and proceed to replace O-rings. I just finished...

With a know less than stellar barrel there are a couple of things you can try that may improve the accuracy and if done judiciously will not cause the barrel to be less than at the start. 1) Cleaning the barrel completely and verifying all leading has been removed with a bore light. 2)...

I agree with Mike above. Sekhmet gauges (digital) for regulator pressure seems the way to go. I have Sekhmet gauges on two of my rifles at the moment with others in hand for installing into my Wildcat and EpicTwo. Without a doubt I can now set my regulators where wanted and then begin tuning...

I am interested to see this rifle come to market.

OK, my suggestion is to obtain the schematics for your various rifles then read through each schematic making notes of the O-rings specified. Once you have compiled your list/s go to one of the many O-ring vendors online and purchase what has been specified for each airgun. Yes you will end up...

Sorry to read about your airgun troubles. Owning a PCP means learning to or paying for O-ring replacement. The O-rings withing the Avenger are not the best coming from the factory. Chances are that several of the internal seals have gotten hard, cracked or just plain failed. Captain O-ring...

Lots of PCPs to fit the situation you have described. I would be considering a .22 cal capable of launching heavy slugs, high 20s to 30s. Reasoning is a flat trajectory and lower flight times. Look for a used Impact, or something similar in power and adjustability. Another thought for you on...

It would help if we knew the brand and model of compressor you are looking to repair.

Here is a YouTube link that will give you a good step by step to follow when doing a reseal to your Avenge-X. The video is not in English but you can just turn off the volume and pay attention to the process: The only O-ring kit for the Avenge-X that I know of is from PyramidAir (...

Nicole Rae ([email protected]) is the person to discuss this with. She has taken over a number of positions within Sekhmet and does an outstanding job at customer service. Good luck to ya.

That's so pretty!

Looks like a rebranded Vevor or something similar. Unfortunately they do not show a picture of the internals, other than showing the transformer is inside. The price is nice and if you have the money to throw away you might give it a try otherwise I would suggest looking at the GX brand and...

Glad you asked. If you are serious about purchasing a portable compressor my suggestion is to look at the GX brand. You will be able to find then being sold at Amazon, Ebay, AliExpress and even Walmart. I have a GX CS1 & GX CS1-I compressors that have served me over three years without being...

Czechs make fine rifles along with their engineering and machining being stellar. Here are a couple of articles you can read to get opinions on how this particular rifle rates: 1) https://hardairmagazine.com/reviews/kalibrgun-snipe-2-pcp-air-rifle-test-review-22-caliber/ 2)...

What an interesting idea. Running both compressors into a t-splitter and then to your gun or bottle. The only issue I see would be overpressuring the receiving vessel. Depending on how quickly the pressure builds I can see a potential issue with an over pressure at the fill. You might want to...