Search results for query: *

congrats donny!

Ps it was the valve stem that was the issue, hatsan put a thicker valve stem on some european models, which limits airflow and thus power.

Evanix airspeed with a a gamo sticker on it!

Hatsan use a thicker valve pin to limit power, i do not know if kral do the same

Thanks peep, when I reassemble I will use a rod or something , though the access screw for the transfer port to make sure the barrel is 100 percent aligned, I will make a mark or something for the air cylinder port alignment also.

Thanks O doyle. I think i understand now, so if the hammer spring is too weak and the pressure too high in the bottle ,then the hammer wont open it up much and the shot will be low powered. As the pressure comes down the hammer will open it more to allow more air flow for a higher powered...

Odoyle Can you tel me what you mean by valve lock? I am still a novice to modifying and tuning. Thanks

Peep, Thanks, yes I think the rifle has been a return and resent out, when i stripped it i noticed the screw for letting the air out was burred and the nut that holds the barrel shroud in place was loose, also everything came apart very easily and there were marks where a scope had been. I did...

HI Have checked the spring, it appears untouched, i also found a 3rd spacer in the hammer that I had not noticed when disassembling. the other 2 were behind the spring inside the retainer type thingy. I cranked the spring so hard the rifle would not cock with a drop to around 550 fps, best was...

HI Folks, I know this is a mostly US site, but hope you guys can help. I bought a Vectis from a company in Spain, Their the power limit is approximately 18 FPE. I am Scottish and live in Portugal where the limit is 1125 fps in 022 so was trying to adjust the power.. I have played with the...