Search results for query: *

Do the FX STX superior liners have a accuracy advantage over the Notos barrels? Is there an advantage of the STX liners on a stock gun? Thanks, Don

To each his own but IMO, you are putting yourself at a disadvantage with a 22 over a .177, for field target. It would help if we know which class you want to shoot. There are hugh differences in equipment in hunter, WFTF and open classes. Are you looking to shoot pcp or a springer. Field target...

If you have enough guns to need 50 breach seals, a measly 200.00 should be chump change! 🤣 Don

I want to purchase a set screw to lock the hammer spring adjustment on my Marauder. Anyone know the thread size? Thanks, Don

When l first started field target hunter, l used a 4-12 Vantage. 12x was the max at the time. It worked well for me. Don

OK thanks, maybe not a free county!

Free country, spend your money where you want and l will do the same. You were lucky to get a rebuild kit. I got lip service. Have a good life. Don

Giving my experience with an Altarous regulator issue, l would never purchase anything sold by Altarous again. Don

OK, found the hammer spring size on the parts list: 9mm od × 1.1wire diameter x 60mm long .345 od × .043 wire diameter x 2.36 inches long

OK, sorry l confused you. English wasn't my best subject in school. Don

Thanks, l don't want to go down the porting road, right now. I have a lathe and mill but want to keep my options open. If l port, there is no going back. My thought was to get some heavier hammer springs to test. This was one of the the reasons for my thread. I want to buy a couple different...

OK, l dropped regulator to 1900psi but can't get fps above 715fps with hammer spring all the way in or out. How is it possible to get the JSBs 13.43s to 775fps - 800fps? Is porting the only way? My gauge is is in mpa and not sure it's accurate. I did 13 mpa (1900) so l'm not sure where to go...

Sorry if my explanation confused some. Don

Yes, l have two tanks to fill my guns with. I will need to fill tanks more often if l fill my guns to higher pressures. Don

Yea, that would be appricated. Thanks,Don

Dude, are you having a bad day? Farily simple to understand. If l fill my gun to 3300psi, l get more fills from my tanks than filling my gun to 3650psi. Not trying to be a jerk. Don

Let's see, when the pressure gets to low to fill my gun, l have to hook my tank to the Altarous booster and fill back up. I would like to do this as little as possible. How's that being a jerk? Don

Dropped my regulator to 1900ish. Gun shot 13.43 JSBs at 750. Took my hammer spring all the way in and no effect. I backed hammer spring back out, 750fps. Turned regulator up to 15mpa (2175 psi). Gun got 30 shots from 3300psi to 2175psi. Great groups, 777fps average, 9fps spread. I will either...

Thanks, l'll adjust regulator and increase hammer spring and see how it goes. Don

I would like to get more fills from my tanks before needing to fill with my Altarous booster. If l fill to 3600, my fills per tank go down fairly quick. I could fill to 4200-4300 but would have to fill tanks a LOT. Don