Search results for query: FX M# Tune

One of my favorite guns. The o ring mod works very well to eliminate bounce. I forget the name, so i call it the stale pastry mod because it sounds similar. Look up the A-team tuning for marauder. The pistol’s adjustment range is not quite the same as an m-rod, but the concept is. Hex is same...

I’m curious how a liner is expected to shoot without the external o-rings. I ask because on AEAC, in the Impact Review, it was noted that there wasn’t a whole lot of difference with or without the o-rings. I have observed with my .25 slug liner and without the o-rings, I’m seeing diagonal...

If your happy with it, leave it. But tuned like the videos, mine was shooting 18's at 950 75 bar. Valve adjustment turned into third line to bring it down to 925. Check the speed of your first couple shots after the gun has sat for an hour.

The gun is the model just prior to the X coming out, whatever that is. ST? It's a 600mm barrel and I used both the FX silencer and the Neil Clague. Ernest power tuned it, but it failed (main valve) pretty quickly. While it was getting fixed for that it got the MkII upgrades. It's got the...

So, as I wait for my 700 mm barrel/slug liner to come back from warranty at FX..(its been there 3 weeks and not even in the queue yet 😩), I have taken my 600 mm barrel and pellet liner off my gen 1 Impact and put it on my Gen2. I had tuned it to 880 fps w JSB MKII 34 gn and though it was pretty...

OK . . . . okey dokey. :) I got me a shooter AND I can (apparently) shoot those FX slugs that I bought a few months ago that my AA just doesn't have the giddy-up-go for. After getting to briefly shoot it yesterday with jsb 16's I could already see the potential that this thing has and...

I have seen Matt’s video/movie 20,000 times (it seems, Youtube algorithms!). I feel and know he is absolutely right in everything he says about getting the best from a slug liner vs slugs. He helped develop them, so he’s undeniably one of the most knowledgeable on FX slug liner tuning. I...

First, today was the first day I could go out to my "range" and the farmer wants me there at dawn before he starts working. When I got to my permission it was 3 C or around 35-37 F. The gun hasn't been adjusted since I did so Monday night, and had the 300 cc bottle filled to around 250-260 bar...

Well you cannot compare a CZ barrel to something that crossman puts into their marauders. Im not sure if I would even compare the the green mountain barrel they use in the .25. Now you could compare a CZ with an FX or Walther. I think that a good barrel influences the price of an airgun but...

Here's some testing with my new barrel (replaced by AoA). I mounted an Athlon Argos scope on the Brocock and my initial thoughts are that the gun feels more stable during the shot cycle than with a slightly smaller/lighter Sightmark I have had on it. This Athlon scope is also mounted a little...

I am taking Grackles at 80 to 100 yards with my Tuned M-Rod .25 with a JSAR SS Valve shooting VK 34 Grain HP Bullets made for the FX Impact! It doesn't matter what you buy now because it won't be long before you will have another and another and another ........ :P

I think pellets are the limiting factor more than barrels. My Gauntlet has a cheap Chinese barrel and it shoots 1/2 inch groups at 50 yards with Crosman dome pellets. I think you have to learn each gun and adjust to the gun and not try to make the gun adjust to you. At least that's what works...

Why can't I compare the same piece of lead that is only made differently? It is not my fault ,that the .22LR manufacturers have not been able to bring any decent improvement over the last 50 years. The same lead CNC turning bullets I developed can also be used for .22LR, so yes I can and will...

I have a 6K helium tank I rent from a welding supplier on a annual basis. 6,000 psi goes a long way. I fill my 90 cf tank and then can load my small rifles. I load my big bore directly from the 6K tank since it runs on 4,500psi. Once the 6K tank drops below 4,500 I would have to feed the helium...

3 power levels regulated really nice gun shooting jsb 18 at 910 for 60 shots very accurate gun comes with tatsu silencer 2 mags 4.5-18-44 ffp discovery scope fx no limit rings pm for more info ready to shoot 1100 shipped MR Rowe did the tuning p m for more info

I have watched tuning guides by Steve, Matt and Ted and they are all excellent, albeit, different. Each has it's own logic and merit but I'm a bit confused. With Steve, you set your reg. pressure then adjust hammer spring fine tune to hit that max velocity spot before it starts to decline. Ted...

I suppose that I'm qualified to answer. Pro's: High quality Dead simple design Great barrel, free floating - yet well secured (and easily removable for cleaning) High powered M-lok rail in stock is excellent Con's: Heavy stock, heavy rifle. It's tough to shoot free standing Loud -...

Thank you for all of that, I will be calling FX tomorrow as my Crown is only about three weeks old... I did better tuning it with just the chronograph, although the gauge read a lower than expected pressure it was consistent... Others said it was too low at 115 (per my gauge) The gauge that is...

That’s awesome n2stuff! My Streamline (140 bar) and Wildcat MKII (130 bar) both have Huma regs and it keeps the shot strings nice and tight, but it’s looking like this AMP regulator is a excellent performer. So far, they’ll be no Huma / FX regulator swap outs for this little puppy! Transfer...

Bullfrog, Thanks for your input. To clarify, I would define my one hole groups as any "ragged hole" group. That's what I'm looking for..so 1/4-3/8 ragged hole with no flyers in 5 shot (at 50 yds) would be perfection to me. I'm going to get .30 cal Crown and leave it at factory tune settings. I...