Search results for query: powder coating

Another alternative that I’ve been reading about is powder coating and sizing slugs. Thing is, I’m unsure if they need to be cleaned prior to powder coating. Again I don’t clean slugs or should I say I haven’t felt the need to clean any slugs I’ve bought. Griffin and NSA slugs come good to go. I...

I made a transfer choke similar to most of the other 1/4 turn types. Plenty of room for this modification. I just barely took off the anodize around the hole to get rid of the lettering. I’ll put some powder coat on the parts….someday maybe. Dave

A Teflon infused powder coat works on slugs. Never tried it on pellets. Just add solvent and spray your slugs one coat and cure them in a small toaster oven. Makes them .001" larger in diameter. An even coat produces a very accurate round. Doesn't completely stop barrel fowling or increase...

Powder coated Apology 28 grain 5.5 slugs.. I hand lapped the choke out of my factory Airforce 22 LW barrel removed the last inch and recrowned . I need bigger slugs to even slug the barrel...So I real fast shake and bake some industrial silver powder coat to them.. It worked.... It built up...

I'm ready to.try bore waxing with powder coat slugs and hand lapped.barrels... So many good ideas😉

How much do you have to use when mixing with alcohol?

I had a little time today so I decided to tumble the receiver, then powder coat it (the tumbling removed all the burrs & roughed up the surfaces for the powder to stick better). I chose a satin black which looks quite cool, in my opinion. Also turned a bolt handle, using el cheapo knurling tool...

They're either just covering their tails, or referring to very *tiny* differences that most people wouldn't even be able to discern. A good anodizing shop can match a color to well within what you can readily see. Look at all the anodized commerical products from big brands - those brands...

The powder coat doesn't interfere at all. It usually pops off in one piece and floats to the top of the melt. I skim it off as it does.

I have the 45 grain actually closer to 48 grain average Arsenal molds spire point powder coated and sized to .222 shooting in the Chaszel 12 twist barrel liner. The Chinese Amazon 8mm valve with heavy hammer and 90 gram hammer.is.getting around 875 fps in the 27.5 Chaszel barrel liner...Initial...

So in case anyone runs into this problem down the road here's what I did and what worked for me. So because it only happened with the cover on I thought something might be rubbing, trouble was nothing showed on the cover. I sprayed the cover with a light coat of athletes foot powder and put it...

...TacII, I probably wouldn’t have minded that much. TACTICAL is the name of the gun though. @woogie_man Looks like the letters are powder coating on top if powder coating? I thought of a few possibilities to remove, worse case scenario, just paint it. I’m digging the wrap, makes it unique...

Use a zip-lock bag, regular size. Add an amount of hBN equivalent to a full .22 cal casing. Close the bag with most the air removed and the bag flat, then shake bag until it is coated. Add pellets and shake and roll them around until all are more white than gray but not snow balls. I wash...

I wasnt using a sabot. Unless someone makes an ultra thin sabot that's .05 thick I don't see how to do it. Yes I know it will screw up the barrel. Edit to add: Maybe someone does make a sabot, I never looked. I saw youtube videos of people shooting them as is. Some people powder coat them or...

Thank you kayaker, that's a very big compliment indeed 👍 Still intend to powder coat all the parts one day (I have a little tribostatic set up at home) but I'm a sucker for a new project so rarely complete anything 😁 🤦‍♂️ Quite alot of work went into the baffles of the moderator (my lathe and...

I got about 50 lbs cast last night.. Getting oven ready for shake and bake powder coating 😁👍

The FPS is 930 fps with a 55 grain Lee 2 cavity mold pure lead powder coated...The barrel is a 22LR Chazsel barrel liner with a 12 twist..The Chazsel barrel liners are $68.00 and is 28 inchs long.. It has a custom Doug Noble Valve.. It will shoot over 1200 fps with 45 grain slugs,,accuracy and...

Alliance Hobby so let me spend some of your money short steel breech a new tube smooth powder coated or not it is a start

This works real well. I polished my barrels and liners with 5000gr and 7000gr diamond polish. They do not foul up shooting hybrids near as offensive as before. I told a friend about a kit for the diamond polish. He used it then told me his guns that where not accurate are very accurate now...

Need a new batch of powder coating, this old batch blobbed all over the place.