Search results for query: *

I'd tend to agree. After creep issues on both my delrin amp regs on the m3 I put huma stuff in there and it's flawless now.

Owning an m3 myself, it was sort of a stopgap development mule to get to the m4 from mods that others were doing in my opinion. The impact can be fixed and reworked with majority backwards compatibility I think. If 2 regs help bandaid cold shot poi shifts even 1 thousandth of an inch, i...

The other poster has me thinking here. There's a few changes that might act in harmony. I know from experience that the amp regs with delrin pistons can be sensitive to damage and quickly start creeping. Maybe the new brass piston regulator is stout enough to do the work that 2 preciously...

Sending jsb monsters super sonic was an entire day for me and my shooting buddy. He was sending 25 slugs supersonic till he blew a bunch of orings out on his maverick. Beer tuning lessons 😂

You can send a lot of projectiles that fast of you need the number. I prefer the subsonic regime personally, ever since I did the rimfire thing with a club it's been something that stuck with me for preference.

930 has been my experience for the sweet speed in my gun. Dreamline shorty doesn't like slugs so much, my impact has been the test rig for that. 1040 for 23 grain javelins on the low tune. I only needed to keep them subsonic. Id like to hear what you get out of it in stock form and just...

I saw him too. The plenum is cheap enough it's worth a try and it's not too hard to do if the air adapter clears the barrel to unthread. There's volume and pressure to be used. For a little bit I was high pressure guy. It gets hot whet im at in California and you can extrude orings if...

Well it's fluid dynamics, this isn't super secret. You can just drop your theory so it's easily searchable and ends repeated questions. It does many beneficial things all at once but it depends on what you're being a little cagey about. It helps mitigate what my marauder suffered from, it's...

This is just my opinion, but i think it's the perfect length for allowing you to achieve close to what the gun is capable of for power, quieter, more efficient(iirc the math showed that to be the ideal barrel length for 22 and air which is why fx used it so long) . It will fit the 700cc and you...

What is the barrel length on the 30 lite you ordered?

The thin shroud clears a bottle but moderates less noise/air volume. It's the road you'll be taking if you get a bigger bottle. Before I talk you out of a 700, are you walking and hunting or target shooting off a bench(animals are targets too).

If you get 20 shots at 80 ft lb I will be surprised and happy for you. Seeing as best I can tell the new tubes are all basically fit as bottles to regulators and they still have the side foster fill, tethering will be easy for bench shooting. There's likely much fine tuning to be done but my...

No worries! I was actually looking for an example of the large diameter shroud to measure and modify to fit the bottle. I have an inexplicable drive to make my airguns as close to silent as possible.

Nope bone stock with the pencil thin shroud since I ordered it as the tactical carbon bottle version. Which also means you may need to do that. The threaded adapter to the action on mine is the smaller diameter left side of the one pictured, but the whole way thru. It was new in box from Utah...

I know the dreamline tactical ship with them. The data charts and pics are out of date depending on which place you look at. It's a bone stock gun because of how mad I am at myself for dumping the money into the impact for slugs that I did and realizing how good it was before, and I don't...

I'm going to bet if its not down-range results it's pressure rating of 1 or all components in the reciever(at the time) between the bottle and the final reg, up until this revision. Perhaps not even for safety but more for warranty cya? Which is what I think the power block was (safety/pressure...

No that gun is 100% stock! I put vinyl camo on it and a bipod and screwed the original factory donny FL from my impact on it. Other than that is as-recieved and I told myself it's not getting touched. We learned from the impact. As for the compressor you can find them on ali express for...

This is my story. First pcp that ive also modified in some minor ways and I don't shoot it or highly enjoy shooting a gen 1 marauder 25 anymore. It fell short of velocity claims and air capacity is poor and being a gen 1 it pinged louder than the muzzle report. Perhaps due to its weight it is...

Strelok will tell you the. Stabilization factor for the projectile dimensions and weight vs twist rate and velocity. There are other calculators online you can search that so it but you will need to know everything about your given projectile. Theres wiggle room on either end of the...

The only excuse I have for 2 regs is my survival mantra. 2 is 1 and 1 is none 😂. I don't know if it's super necessary outside extreme tight tolerance paper shooting?