Search results for query: *

I use a Super Target Systems 12" bullet trap with minimal lead dust & impact noise, for all pellets and .22 caliber rimfire. Made of very thick and heavy steel. It's a little pricey but so very quiet. I stuff a pair of old jeans behind the 1/2" thick rubber front insert, which is replaceable...

Hope this helps. After removing the screws below, pull out the rear and the white screws are up top. Very important tip! Plug up that rear left hole on the receiver with one of the screws to keep the spring for the power adjust from falling out while you're working.

Here's where the two screws reside. You need to take apart the bottom portion/trigger guard from the receiver to gain access. This part below needs to be removed. I can take apart mine and provide more detailed pictures if needed.

Same for my and my Atomic. I had to tighten down the two white nylon screws above above the hammer spring to prevent any slight movement.

I've had similar experiences shooting out of my Atomic XR @ 12-13fpe. Gone through about 9 tins. More good days than bad but that one flyer creeps in and it's like "Woah", WTH. Hopefully the JTS I have on order does better overall.

I had this exact same problem. My fore knuckle would get banged up by the lever every time I cocked it. I unintentionally discovered a fix by getting new grips. The stock grip was way too narrow and forward leaning for me. Having a more vertical grip brought my knuckle back and away from the...

@Sky King I'm assuming you tried to turn the HS and it did not turn for you. It's because the white plastic screw holding in place was evidently too tight on yours. My Atomic has the exact same feature. All that's needed is to take apart the buttstock from the main body and back off the...

I've been eyeing this hand pump for a while. Held off due to the lack of reviews. After reading this post, I pulled the trigger and ordered one from Ares. Thanks for sharing your experience with the pump.

I've had both the 5x30 and the 5x30 Pro. I prefer the Pro as it's longer eye relief (3.3in") allows me to more clearly see my bubble level. I use it for bird pesting anywhere from 10 to 50 yards. The 5x zoom is perfect for my needs. I'll probably return the regular 5x30 model and keep the...

First order of business should be to determine approximately where the leak is coming from. Brocock have very detailed videos on how to disassemble and reassemble your gun detailing what o-ring does what along the process. My Brocock developed a leak at the air cylinder and it wasn't too...

✋

IN

Went through 3 tins and all were 10-25 fps slower in my Brocock Atomic XR measuring with a FX Pocket Radar.

I also experienced similar spreads. Not only that, fps was consistently lower than H@N Match 10.65 and JSB 10.34. Enough for me to avoid.

My little "Beastmaster" Atomic XR in .177.

No kidding about going through all this trouble. Scuffed the surface of a few threads, but not too bad. Still functions okay. Grateful that AoA were prepared to send me a new one if needed. Now I'm anxiously waiting for my new Brocock MF170 to arrive.

Finally got it off using a bench vise. Taped up the threads and it came off with a bit of force. Really appreciate all the input from everyone.

Definitely don't need anymore surprises. Thankfully I confirmed with AoA that the threads are indeed 1/2". I appreciate the heads up though.

Ordered some 1/2-20 thin jam nuts and am crossing my fingers.

Tried applying Loctite on the male end into the shroud. No go, broke free when trying to unscrew the moderator. Had a hard time finding the appropriate nut at my hardware store. Anyone know the thread pitch? I have a rubber strap wrench on the way to see if that works. Shane @AOA suggested I...