Search results for query: *

Sorry guys for the late response. To Derek’s knowledge the .30 barrels are still .3063

I didn’t mention it but I did use warm water. I removed and cleaned the separator and desiccant beads, both check valves in the head, as well as blew out the lines. The separator had some gunk mixed in with the desiccant beats. I threw them away and added new desiccant.

...described. As for storage, I do believe the cold weather exacerbates the issue but my cs4 was already acting up and would not pump properly in a 75* room let alone a 35* garage. After performing the flush all is working well. It’s your money, it’s your machine, do as you please. At least...

The cs4 lives to pump another tank! The original burst disc blew right before adding water to the grease pot, go figure! So I replaced it with the spare discs provided and they all burst around 3,500-4,000 psi. So I reached out to gx and asked for “less than 40 Mpa” burst discs. The package...

These AGT’s are great shooters! Uragan 2 .25 700mm shooting 37gr zans at 955 fps. Best 3 shot group taken that day in between lulls of 10-15 mph wind gusts from a bench. Target distance 96 yards. Most of the groups were 3/4” or less in light wind. I’m hooked on AGT. Excellent hunting rig...

Excellent news! Thank you for being the lone wolf! I’ll give it a shot this weekend. Did you have to add grease after performing the procedure? Half turn? Full turn? Leave it alone and continue with the normal grease schedule (1 turn every 4-6 hours)?

I’ll give it a shot, but I don’t have a lot of confidence that’s going to help much

Ta Ta…. it was your thread that I read extensively and you had one member poo poo the idea for about five pages long without understanding how the unit works. He was under the impression that the crank and bearings get greased from the grease pot. Anyone who has searched for teardown videos...

Well, after letting the compressor run in its current state for about five minutes I removed the check valve underneath the burst disc and to my surprise water droplets were being pushed out. There’s water in there to begin with due to compression. I, like you, had the same train of thought of...

Hi everyone! My CS4 has been a workhorse for the last 50 hours of run time up until the weather got cold. Now that the temperature dropped and the unit is in my garage, when turning it on it pumps very very slowly. I cleaned the check valve located underneath the burst disc as well as the...

One of the members reported using 59 gr and 54 gr Zans with really good accuracy. Those only come in .300 so I i’m not sure. I’ll reach out to Derek and Tony to see what they say. I’ll fill you guys in when I find out.

When did you buy it if you don’t mind me asking?

Thanks buddy for the links! I go deep into the rabbit hole before I ask any questions on AGN lol! I’ve read every thread and I’ve watched every YouTube video I can find. My main concern is the bore diameter. Is it .3063 or is it .300 is the question…. I don’t want to be limited to shooting...

Thank you everyone for your responses! Money is better spent on another rifle. The m3 is staying in its stock configuration and we’re most likely going with a V3 HP. It might be worth the wait for the Uragan 3 to be released. The sidewinder is the ultimate predator gun! Damn you guys! It’s...

Great minds think alike I called them yesterday and spoke to their tech! We talked in detail about fine tuning the U2 and touched on the V3 HP. That conversation piqued my interest.

I’m leaning towards another gun. But if we kept the high power mods in the m3 it would be a dedicated slug gun in .22 (34gr) or .30 (+60gr). There’s not a whole lot of reviews on the Vulcan 3 HP and I’m looking forward to hearing from current/past owners. Questions I have: 1. How loud is the...

Hi everyone! We’re not sure what direction to go in and could use some advice. We currently have an M3 .22 sniper and we’re looking to add a .30 to the collection for hunting coyotes and raccoons. Do we repurpose/upgrade/refresh the m3 to a .30 slugger or buy a Vulcan 3 hp .30? What would...

I’m tempted to buy an Uragan 2….pics please! I’m looking forward to it 👍

Congrats man! The Uragan 2 should be leaps and bounds better in terms of build quality compared to your M11. Unfortunately I can’t help answer your other questions but I’m sure someone here will chime in. Post some pics of the rifle and groups when you get a chance.