Search results for query: *

Aloha Mike Back from vacation & the Shoebox is running perfectly with all its new O-Rings & some TLC. I want to thank everyone that has helped answer my many questions with great suggestions & the exact O-Ring list (MIKE) When it stops raining the new FX Wildcat Mk3 Compact .25cal will be...

Aloha Mike Thanks much for all the info you have shared with me... Between the schematic and watching Tom Kaye do the drive belt upgrade (showing the complete air block) & there is an Oring in the bottom of the block, it makes sense now what I remember reading that there are 7 Orings for...

Aloha Mike I remembered that I replaced (1) O ring between small spacer & large spacer (#113 & 114) on the bottom cylinder, so I took it apart again and there was an O ring really lodged in the very bottom of the small spacer. I pulled that out and replaced it. It was not in good shape. I...

Aloha Mike The Shoebox schematic is greatly appreciated (I've never seen this before). You mention the bleeder valve? Not sure which that is. And to get to the Vent Assembly #37 does the Air Block have to be removed to access ? Hopefully, I've attached a picture of the Air Block with the...

Aloha to All (Still trying to get this Shoebox running in the middle of the Pacific) So I've replaced the burst disk & piston guide , replaced O-rings on both cylinders--it runs as it always did but not producing any air-I checked for air leaks with a soap solution & at the bottom of the...

Hey Quad82 please disregard the sizes I posted above (3/8x24thread) that's for a different screw

Thanks Quad82 Quick question...looking on Ebay & Amazon for 7.5 burst disk--they don't give much of a description, are they all 3/8 x 24 thread? S-Fish

Thanks Mike There's air leaking from rear of the block cylinder manifold. By chance is the burst disc located there? I've never removed this piece. All I have is the original manual basically for operations and light maintenance & whatever is left on the internet. Can the burst disc be...

So at this point, I’ve replaced a few unexpected parts (bunting bearings, push on nuts, Delrin piston guide etc) on my 1st gen Shoebox #847 the machine seems to run good but is really not producing much air—- can anyone give a solution or suggestion — I don’t want to give up on this unit...

Aloha Airgunners I have a first generation Shoebox Compressor 4500psi that I just rebuilt the cylinders. One of the Derlin cylinder nut ends (where the piston goes thru) was cross threaded...so, I’m hoping either someone has an extra to buy or know where Parts might be available...