Search results for query: *

Nope… well, at least I think not.

Thanks! Yeah hopefully full reseal will do the trick… hard to get parts for them if it’s more than that…

Good idea. Checked that though and looked fine. Also based on how the hammer is designed it’s basically flying once the sear lets go. May be the “anti rotation” screw on the hammer is dragging but looked fine as well when i had the hammer out…

Yeah that’s on the list once the orings arrive, so is pulling the valve and make sure it’s fine as well… No hesitation here to tear airguns apart :) still weird… it’s consistently inconsistent. Can almost predict the next slow shot.

Cleaned the hammer channel meticulously… thought so as well but no luck…

New to me 15in Evol in .22… needed some work from the beginning and I though I got it there but this last thing is damn persistent… It’ll shot a handful of shots or so at the speed I set it to (965fps with 18grain / 890ish with 22 grain), then 1 to 3 or so shots way slower, then back to set...

Nice :) But man, what reg pressure do you have to run to send those 23gr .177 :))) 0.11 G1 BC lol…

See, this is the thing. There is tons of studies, empirical data based on real examples of countries imposing broad scale tariffs over years and years. Undisputed in academics. Will there be a handful of businesses not taking advantage? Sure. However, the other 95% will. But somehow we still...

You wish ;) because chances are that they either raise prices as well (because they can now) OR they need stuff from abroad to “make” it here and have higher costs as well… Well established fact in economics with historic data to back it up that tariffs are a tax on your own people… we’ll all...

Why shoot a possum though? They are pretty beneficial… don’t get me wrong, I hunt and if a pest comes across no hesitation to give it a case of very localized lead poisoning. But animals that are good for the system and don’t do any damage are welcome in my yard… Possum being high on the list of...

Hmmm if you provide a bit more info as to what you like etc you’ll probably get better advice :) What are the distances you plan to shot? Pellets or slugs (slugs being their own rabbit hole and source for frustration, so probably not ideal to start your PCP journey with…)? Prefer traditional...

Leave the rubber ball out. M4 has it built in into the adjuster.

This listing has been renewed

Very nice!!! And congratulations to your new Taipan! The gun not cocking sometimes until you fully pull the trigger can be solved by way of adjusting the sear. The manual says don’t adjust the corresponding screws but that’s your problem right there (my vet 2 was doing the same, not uncommon).

Nah you gotta wait for the 2B barrel for slugs. I was on back order for it with AOA for 4 months and it was always “2 more weeks or so”… cancelled meanwhile, but if you want to shoot slugs that’s what you want. Otherwise the 28in is the same 1:30 twist as the other barrels (6B barrel).

Got one. Didn’t even bother trying slugs in it based on experience with other ghost “non-slug” barrels. I got lucky with mine, shoots AEA 34gr very accurately. I meanwhile swap between the 28in .25 barrel and .22 HP barrel every now and then and have it set so that I don’t have to change the...

Got one, it’s on my wildcat. Does a decent job for the size but Falx is Falx (I have 5 :)).

My most accurate out of the box guns (maybe with a little tuning to balance reg and hammer): DRS tactical .22 600mm. AEA 18gr and 22gr pellets. Uragan 3 .22 600mm. Same pellets. Wildcat mk 3 compact, 22. AEA 18gr and JSB Hades. They’ll give a .22 pellets size hole at 25y and a ragged hole at...

This listing has been renewed

Mine came with a bit too much hammer as well. Don’t remember how much I backed it out but maybe a turn or so?! Just play with it :) @JaceSpace1369 I didn’t have to back it out as much as with the U2, so didn’t have to mod the stock to fit it back in :) the U3 valve seems to be way easier to...