Search results for query: *

The video above - Hmm, about 28 seconds in... I sure hope the barrel is not..."solid" !! Not going to shoot very well that way. Mike

jps2468, DID...mention that ! Mike

Nate, (others) - The gun is MUCH easier to cock if you use "both", your fingers AND your thumb. 1 - Partially open the lever. 2 - Place your left hand fingers behind the lever. 3 - Place your thumb at the back of the lever. The short part of the lever, sticking out of the back of the frame. 4...

In red above. Check that, leaving a coil spring compressed, does...NO harm to overall power of the spring. Check any good spring manufacturing manual. Also, I've got first hand knowledge on a few types of coil springs. Mike

Here's quick shot of mine. Mike

In red above - A person...can...contact him through the Airgun Nation, and do the purchase that way. But no, he is not advertising through this site. At least he was allowing that type of contact. Had mine for a while now. Great gun. Mike

There are trigger shoes available that have a set screw that protrudes from the face of the trigger that have the same effect. I like your idea better. Mike

The "best"...for them, may not be the "best"...for you, for a variety of reasons ! Why not do some experimenting for yourself ? Mike

Um...the "latest" what ? I saw one in the classified section yesterday or the day before. https://airgunarcheryfun.ca/air-pistol/ Ask Wes. He may know. Here ya go... https://www.airgunnation.com/threads/artemis-pp700-field-target-pistol.1329854/ Mike

I've changed the wrap a coupe of time on my guns. Simple...just pull ! If that's a problem for you, use a heat gun to warm the vinyl a little. You may need some "Goofoff" (or similar) to clean any adhesive that's left on the stock. Mike

Bodacious - Call Scout and ask if they'll give you a break (cost wise) on buying a later, octagonal barrel. After reading your original post, I bought a borescope, just to check the barrel on mine (bought about 3 weeks back). The "rifling" in mine is octagonal. Smooth and clean. Not quite a...

Hmmm, seems like you answered your own question (in red above)...right ? Not THAT...big a difference in the mk1 and the mk3. Mike

Yep...no use in taxing ALL of the o-rings for no reason ! Store uncocked . I also try to store with the cylinder pressure just above the regulator setting (lower than full pressure) vs. full pressure. Again, no use in taxing the o-rings. Mike

Compact. Sorry, I should have mentioned that in my first post. Mike

Comeon...just toss a coin..! Your "in consideration" guns are all quality guns and will serve you well. Grow a pair and just pick one ! What if you go by someone else's decision, and you aren't happy ? JUST PICK ONE......................... Mike

All true. Have bought two from Charlie. Great guy. Mike

Though factory done on my Brocock Sahara, yeah, the color is growing on me too. After going through a "shortening" operation, I repainted the shroud, and Huma M30 muffler, and the cheek rest. Since the picture, I also painted the small piece in front of the cheek rest too. Been wondering about...

If that's freehand, yes, very impressed. If it's bench rest, bipod, tripod, sand bag, etc.,...the gun did all the work. Mike

I left my Epock filled to about 1500psi for two+ days, just to check the overall system...yeah, for leaks. It lost 1000psi, in that 2+ days. As verified with a piece of tape on the gauge face. I refilled, shot a few rounds, down to 1500psi again, let it sit for about two more days, a solid...

So...are you now better off with all of the different recommendations ? I'd assume that you had a couple that you were looking at. Now, you still...have to pick between a BUNCH, rather than a couple ! Still requires a bit of homework, that you were trying to get out of. Mike