Search results for query: *

I had received M3 from a user that had a manufacturing fault in 1st regulator. I contacted FX and Mr. Johan sent me the 1st regulator free of cost. I thank FX for such a great after sales support. Regards, Mubhaur

So that is a technical question. Although I am not a professional tuner but I do tuning for pleasure. Accuracy is a combination of projectile, barrel, rpm of the projectile and fps. Now if we keep the projectile and barrel constant, the rest of accuracy depends on fps and effective rpm...

The gun has been tuned at 100 yards for extreme accuracy. When you come to 50 yards, the tuning gets compromised or you would need to readjust the hammer spring a bit for extreme accuracy at 50. It is very routine phenomenon. Bhaur

By the grace of God I have recovered. Many thanks to my friends on this forum who remained concerned and who prayed for my health. So kind of you. Umair Bhaur

Sometimes we get such groups that we ourselves become amazed. Following video is showing a group of 8 shots at around 940 fps with 18.13 grain JSB pellets at 70 yards distance. This is the same RAW that had come with a bad barrel and I had installed BSA barrel in it. It is shot by the owner...

If the piston contact surface and adjuster screw surface are perfectly matching and all O rings are in good condition, there should be no creep or just a couple of bars creep overnight. I have recently rebuilt a regulator of mk1 and gave the shape of adjuster screw tip like AMP regulator...

Yes a good PCP can beat .22 LR in accuracy

My experience is this that FX always stand with its customers. Please watch the following video. An M3 came to me for repair and it's the first time that I found that 1st regulator doesn't have any breathing hole. It's not reg delete part but all parts of 1st regulator are inside it. Some...

Sekmet has sent me a few gauges for testing and feedback. In my case I have communicated to them that one of the 25 mm gauges stopped working. One 28 mm gauge gives 7 bars higher reading. All other gauges are working fine. I have installed a 25mm gauge on a friend's RAW HM1000x. So far so...

I am really surprised that why FX did not participated in this discussion. They can explain the real situation. I have found FX to be the best in customer support. Normally they cooperate out of the way.

FX is a great company specially when we talk about after sale support. I am also from the OP country but I always found FX to be the best in after sale support provider even in my country where there is no dealer. I hope FX will see this post and will find out some reasonable solution. Mubhaur

I can assume that even if you achieved less cocking effort and kept the OEM hammer, your lock time would have increased which is not good

Hi, Since you are into it, I hope some of my videos on valve opening in atmosphere would be interesting for you. Link below. Mubhaur

Addiction

That is why I installed external plenums.

Theoben Rapids had much better quality than RAW guns. Amazing workmanship and anodizing.

Any idea about the volume of plenum of old HM1000X and newer HM1000X?

Trust me and give me some more time please

Thank you. I just need prayers my dear