Search results for query: *

This listing has been renewed

I want to add, my machinist has all my sketches and dimensions so if you’re interested in any of my parts pm me and I’ll pass on his contact info. The brass inserts are made by AGN member CFS916. He’s been making brass and tungsten parts for AGN members for awhile now, and has always done a...

Had mine custom made to my drawings. The 1 1/4” stainless block adds the perfect distance for my LOP and the ST magnetic adapter is bolted onto it. The machinist did a great job in following the contour of the Skout factory butt perfectly! This design meets three requirements of mine- I still...

Encore- do yourself a big favor being this is your first pcp and a complicated one at that, keep a notebook dedicated to this gun and detail note everything you do, every adjustment you make. Take note of your tunes and at whet part of the day the tunes were found/achieved. Temps, humidity, etc...

Yeah it’ll take a good afternoon to put that to a test. If you notice not a lot of folks will post up strings with high shot count as to get a low ES and SD consistently your regs have to be in tip top shape. Back in 2021 while not paying attention to my chrono I shot these with my dual reg’d...

Put that M4 to the test, starting from shot #1 after it’s sat for a few hours, and shoot all the way to reg pressure, then let’s look at that shot string along with targets. So many are all about shot count, so let’s test it, to see the consistency and accuracy

The Diana model K98 German Mauser in a pcp- if you can find them

Steve123- from the pics you’re showing, you have like a very ultimate set up, very nice!

Chatted with bill earlier today before I performed the service, and he suggested at least once a year to perform this solenoid service maintenance. Thanks for posting the link, Mike, as I or most anyone wouldn’t have known the solenoid is a serviceable part. My epoch is firing on all four...

Mike, Bill doesn’t mention it on the vid but does this service procedure require the gun and the action be drained of all air? Also, what is the service interval? Once a year? After so many shots? My gun actually did the burp thing twice today while target shooting

This listing has been renewed

It is on my VP model also. I’m finding out some folks didn’t have a spacer come on their VP models. I contacted Newman @ 910 who used to be head tech for FXUSA and he had never heard of a valve spacer on these. I guess you and I got the “deluxe” models of the VP line?

To the OP- I’m not going to read thru all 7 pages of this discussion but I’ll do my best to address your starting post. Im not the expert with the perfect answer and if any comments were made previous that are parallel with what I’m about to say, forgive me for repeating- This post made by...

Mike, I’ve since switched on the type of backing to keep the mulch secured from spilling out. At first it was the bird scene hardware cloth, then I used rolled aluminum flashing, and both just created a mess of sharp shrapnel bits. So now I use 2” thick neoprene padding from the Hvac shop I used...

Steve disassemble your LP reg and check that tiny bugger sized(a healthy bugger, if I may)plastic seal. Yours may be hammered or installed incorrectly. In your spares box with all the seals look for a plastic bugger sized rod with a step in to it. That’s the seal that goes into the LP reg...

Works every time…👍👍

@ STEVE123: As far as finding leaks, I’ve tried many types including electronic beep detectors, which only work best if it’s a substantial leak. Same with the CRC spray foam that already has bubbles that make it difficult to find small leaks, and those foam detectors leave a mess. What’s worked...

Exactly, Troy. This post by Skout is a perfect example I’ve given to many folks that have recently asked me my thoughts and opinions on investing in a Skout, and moving away from platforms they have been “comfortable “ with. I know of no other that publicly announces a design upgrade to the...

This listing has been renewed