Search results for query: Mr.H

I will bear this response in mind. S7

...with his FX Crown – taking our card out to 47 yards !! (post# 2736) Welcome: Welcome to our new shooters Smok3y, RM1000GUY, JEFFPPC and Mr.H - keep those submissions coming. Ok, you’ve spent enough time admiring yourselves on these leaderboards – now GET SOME LEAD DOWNRANGE !! -Ed

Why not, it is always a cylinder.

I decided to try checking the barrel so I started filling until it got above 110 bar and put some soapy water on my finger tip and placed it over the end of the barrel. Sure enough, that's where it's coming from. I'm not a rifle expert so where do I look for that type of leak on a Taipan Veteran...

Only shame is they don’t take PayPal. Ugh!

The important thing about the appearance of this muffler is that you like it, Mr.H. Or at least, can tolerate it. To me, the head looks fat at 2" in diameter. So, I have shaved 10.8 mm off the diameter to see what a 40 mm OD version would look like - below. How much would that loss in...

Let me know if you need other photos. This is on my kitchen island, the lighting isn’t as good as it could be, but I wanted to get these to you now..

It looks like a piece of Delrin was machined to the I.D. of the shroud tube. That piece(sleeve) was machined to match the O.D. of the barrel. The shroud sleeves right on to the barrel. Very snug fit. Once the shroud mates with that "pinwheel" threaded insert, the barrel screws in place. I...

Yes, the specs are on Athlon's website now.

I have a x-sight 5 lrf 3-15 model mounted to my night pesting rig. Overall it has worked well for this application and ballistic calculations have been spot on for me. It does have some quirks though. The user interface is slow to navigate, and its missing quite a few settings that would greatly...

Mr.H, I have taken the dimensions given to do a quick layout. What I don't know I have assumed: Barrel OD: 15 mm Barrel threaded stud length: 10 mm Shroud tube ID: 29 mm (non threaded diameter) Air tank OD: 31 mm Barrel to air tank center distance: 33 mm (2 mm space between shroud tube and...

I feel the same way and now regret not getting a vet long. The construction of the original vet looked more solid, especially how beefy the scope rail attahced to the barrel and the air tube. The new frame looks more SPA-like to me.

NO.

AMEN on the nasty part, had a feral drop her litter in my garage, even day old kittens were all tooth and claw, they and momma went to the pound. Same time we had another female drop a litter in the garage, sweetest thing you'd ever meet, we kept her and all but one of her kittens all great...

No, have not contacted HW. Just reading up or seeing what the inter webs says on the subject.

@Shinyknight It's a basic question and there's info in the threads on the topic. Personally if I know I won't use a gun for a while, I will first wipe off any sweat, water, or oils (from my hands and skin) with a clean rag. Next I will wipe the outside of the gun down with Ballistol oil while...

I have the Heras 6-24 SFP. Heads and shoulders above the Helix.

...a lot of experience making Tesla Valves work, I would invite you to create a TV section that I can drop into my design, as you specify. Then Mr.H would be able to test at least two configurations. The space to be populated with one or more TVs would be some or all of that fitting into the...

@Mr.H That Huggette is just about perfect for a 40 fpe 22... Seriously though, if you are wanting a moderator the same diameter as the shroud, you should hit EBay and order the CF tubing you need to simply replace the shroud you have. For $30.00 or so you can order a 500mm length of CF that is...

Looks like a decent CA glue. I've been using Starbond recently and always had good luck with stuff from Bob Smith Industries. I have a bit of a chemical sensitivity to CA after building lots of balsawood planes and bridges (Science Olympiad), so it's not my favorite type of glue to use. But it...