Search results for query: *

This is the paper that Ernest uses in his video on polishing washers. Zona 37-948 3M Wet/Dry Polishing Paper, 8-1/2-Inch X 11-Inch, Assortment Pack One Each 1, 2, 3, 9, 15, and 30 Micron https://a.co/d/fvkPGzK Do not use silicone on the washers. Don't over do the oil.

Topdeep does not have any in stock. I think i found one waiting for a response.

I guess I'm looking for a real back up YONG HENG in stock in the US i expect my 40hr version will not out last the coming price jump. I have spare parts but probably not the one that will break. Amazon? Ebay? Thanks for your input.

@TnCnDn ... see above !

PCPOlsen has designed Manuloader for a number of PCP's. i have made some for my impacts and they work well. Another plus is that you will have fewer / No double loads. https://cults3d.com/en/users/PCPOlsen/3d-models Unless you have patience and a dialed in 3D printer it is difficult to achieve...

Welcome, if you haven't heard it yet High Pressure Air is one of the first things you need to figure out how to get a supply. Being an x sherif you may know some firefighters that could help you out as long as you have a DOT certified SCBA with a current inspection tank. Have fun on your...

Silicone is not a metal to metal lube! It will cause galling and eventually will ruin the threads. You can use a bit of Molly lube or GPL-204.

If you could contact this seller you would find that his o rings do a better job of helping the first shots slow problem Check out FX Impact M4 - M3 Accu Shot Valve rod o rings New Design on eBay! https://www.ebay.com/itm/267122067994?

The bottle can be unscrewed but it is a lot easier and less chance of damage to the threads if it's not full. 150bar seems like a good trade off. PS do not put silicone on the threads!

The Savior case is pretty nice. Savior Equipment Specialist Single Long Gun Bag Tactical Padded Soft Case w/Padded Handle Carrier, Adjustable Sling, Dual Lockable Zipper https://a.co/d/8Sk2hAH Savior Equipment Urban Warfare... https://www.amazon.com/dp/B07FDP7CDM?ref=ppx_pop_mob_ap_share

As a note the Mountian Metal pic rail is not the same height front to back. And if you mount a compact scope with the eye piece further back you will need rings of 2 different heights. in my case I ended up with 2 different brands of adjustable rings.

Unless the raw materials come from overseas.

Do the legs on your tripod spread out to almost flat? If shooting from a table it would help the tipping problem. Of course if you need the extra height that will not work.

Lots of talk on this subject. Scuba tanks are not ideal. If you are getting any scuba or scba filled commercially will require the tank to have current test! https://www.airgunnation.com/threads/tank-pros-cons.1309187/ BTW welcome to AGN.

If you can find Viton - FKM rings the same size they should be more heat resistant.

https://www.airgunnation.com/threads/needed-wanted-pcp-tools.1318831/

Purple Ice and Purple Oil are 2 different products.

Or more likely you were not used to the force required to get the pellets fully seated past the breach O-ring.

Did you clean the barrel while it was out? You may have some grime built up in the mm that wasn't being used to seat the pellets when the barrel wasn't all the way in. surprised you didn't have accuracy issues and I'd guess your speed was different.

Real heat gun not a hair dryer!