Search results for query: *

I'm getting good at taking it apart and putting it back together,lol.......

Just make sure there's air in you tank! I went out after a squirrel, took a dry fire shot and heard a tank. On inspection the gun had leaked out all it's air. It damaged the valve seat and I'm still working on getting it to hold air....

Hi folks, I've been resealing my Royale .22, regwas leaking, I replaced it with a Huma. It's leaking now from the barrel. I have a new valve stem and seat, but the new parts have a smaller valve seal and valve stem seal. I'm concerned if I use the new parts I'll lose power. Does anyone have...

You have two options to mount optics on the 1322-either get a steel breech for it around $40, or get an intermount for less than $15 https://www.crosman.com/product/crosman-scope-mounts/ that clamps to the barrel and the scope rings mount on it. A red dot sight is so much fun you may find...

An FYI about reseal kits-the FX branded kit for my Royale I bought from Utah Air did not include either the outer or inner regulator seals, Not sure about other kits.

You might give Utah airguns a call and ask to speak to a repair tech. I did just that a few days ago and the guy I spoke with was helpful.

I have no experience with Air force guns, but have you considered lowering your reg set point to 2000 psi or even 1800 psi? You'd have more regulated shots but might sacrifice some power. You might also try a lighter hammer strike? Your shot graph looks like the classic cliff from too much...

Gerry, Thanks for the help- I'll probably just get a Huma reg. Did you get yours directly from Huma?

Hi Gerry, The thought of getting a Huma did cross my mind-I was hoping to get back to shooting it sooner, but I may go that way since I may have to wait for parts. Does the Boss have the plastic washer between the reg and bottle adapter? I don't know how necessary it is.

Thanks for you replies- I got the bottle off with no problem. I'm a little hesitant to take the reg apart, but it really doesn't look all that complicated other than the disassembly. I will say those old hardened O-rings are take some effort to remove. I also seem to be missing the plastic...

Hi, Folks, I'm resealing my Royale 400, I grabbed it to go shoot and it had leaked down to zero. I bought a reseal kit and got started. I replaced the outer O rings on the reg as well as the fill port and bottle adapter O rings. It's now leaking out the reg vent hole, it will hold at 100 bar...

Except ground squirrels don't always sit still!

Looks like you'll be ok to me- nice offhand group!

The flat area on the left side of the fork near the barrel latch doesn't look right to me.

A quick google search found this on ebay-Sheridan Bolt Hope that helps PS-this seller has a lot of parts for old pumper guns

I had a Rebel for a while, it was so-so, it was fun to shoot and pretty accurate on 3 pumps. After more than 3 pumps the trigger got really stiff. The plastic optics rail was worthless, no rings would fit. I did like the stock . I would not recommend it .

Nice shooting! How is the trigger on the 392?

That stock is one very nice piece of wood!

There's a rules section that will answer your questions. It's at the very bottom of the AGN home page.