Search results for query: *

so, where have you been i have been in the Chaser rabbit hole since 2019 do you have an old or new version the new version lost the front trigger adjustment screw while it kept the rear one no one knows about and either way both screws are to short and the sear spring can be replaced with a...

so i just read this and it may help in the future For o-rings used with CO2, **polyurethane and fluoroelastomers (like Viton) are good choices due to their high resistance to CO2 and good sealing properties. Nitrile (Buna-N) can also be used, but it's important to consider the specific...

the chasing of Orings is something that most of have to do at some point and some are easy to find, end of story but as you have found out you can spend hours looking and looking again your size info is very helpful for the next guy but the inability to buy what you want-need is so frustrating...

those stock spacer look interesting i am coming to the conclusion that we all need 3D printers, this would be a perfect project for a 3D printer i am all about wood, easy to work with but as a stock extension i am not sure one thing in this case it needs to be reversable so the rifles factory...

nice condition

well as poorly as the aluminum to wood fits now i would be looking for some 1.5 inch aluminum and just block it out FWB did make spacers and things ut finding that stuff could be impossible so if you could get the black off the aluminum then go Delrin butt pad is looking old so that could be...

so, a Airbug is a Chaser for the most part different grips tube end plug and barrel most never take the grip frames off to see there is another trigger adjustment screw but of course it is too short to do much as is the front screw now the rub of changing one to look like the other, parts oh...

have one completely redid the trigger would i buy one again NO the sights make the pistol worthless but i am still working on mine here is a long thread i was on https://airgunwarriors.com/community/airgun-talk/umarez-markpoint/ if the trigger had the leverage at the bottom of the sear it...

the wood looks like what Beeman had grips made out of Bolong Eta

the Diana K are just about impossible to find and yes your stock and the K are the same except the butt pad is wood on the K and they have a longer dovetail about twice and they have the Tootsie Roll barrel weight not my rifle just saved picture

well i made one out of a Delrin rod and at the time of the picture it decided to hide i would take the Delrin and use 3 glue dots to hole it in place and then try to get the seal on would it work every time that would be a big hell no the little tube to tie everything together i believe is...

my friend you are in trouble and i hate to say that the blue in my picture will be the red in your hand and you can see it has lips the rear seal does not i am not type of person that will tell anyone to stop because they are in over their head but i am tempted here i will tell you i will give...

parts i would guess would be impossible to find but many soft parts might be just off the shelf Orings most tubes that take Orings would be the ID of 113 Oring which is pretty much standard but any valve seals could be another story Vintage has many pictures and it appears to be a very refined...

to keep all my gun cases full and happy of course

so, i am not sure what that is all about but Chaser Barrels and Bandit barrels are threaded in 10mm-1.0 threads the Airbug is not and it is the CP barrel there was a seller on Ebay that 3D printed adapters i bought many and they were cheap and made the barrel look normal there were Bandit...

well that is great news Frank i am sorry you were the one to have to go through this but it would seem they can be repaired by welding them now the interesting part will be for how long now you are ready to go have some fun

you mean the 2 Oring that are on the barrel where it slides into the breech 0.80mm x 8.4mm ID so, i bought some years ago and they were 0.21 each and now they are $1.03 each shop around but you will find they are a hard size to find and 1mm CS will not work i tried that...

so, the Ebay sell from Poland sent me a new message and he can get the part but his greed ended that source as you can see in the message to me i would carve one out with a spoon before i paid that price now on the 717-747 bolt when you open them up put some white grease on them, instead of...

well at the age of 75 i will pass but a plasma table could do the same work in what 15 seconds now i agree the parts could be made with some common tools but we all are missing something the front pin rivet how the hell do we overcome that i would believe it was done in a press at the factory...

so i messaged an Ebay seller in Poland last night, it was a stab in the dark he has some Baikal stuff and i asked can you get IZH 46M parts and here is his answer now you will not know what all that means till we see them nut maybe we could have something with this seller and prices will be what...