Search results for query: *

Anyone experience Hammer Creep with their PCP. I noticed this on my Avenge X today FPS started out at 880 fps and slowly dropped down to approx 850 fps. Checked the hammer and it appears to be locked all the way in. It started out at 2.5 turns CW

What's it do at 50 and 100 yards?

Each barrel is different, so you need to test several different brands. JSB 25.39 shot the best in my 25 cal. AEA, JST and FX are also good choices.

I've used the 22 cal as well as the 25, and do not see any barrel movement as you describe. Lubricate all the o rings when you remove and install the barrels. The shroud should tighten up fully when hand tight. The Terminator band and grommets helped with stability.

Suggest you learn all you can about your first gun. Don't be in a hurry, and then if you feel it's in your best interest look for some else.

I'd just purchase several replacement Fill probes o use as backups. just be sure you get the proper size. they are way cheaper than freight. Always place a drop of silicone oil on the fill probe when you refill the air supply.

Always remember to place a drop of Silicone oil on the fill probe when adding air to the gun. Helps keep the o rings inside the gun lubricated.

I would add Silicone Oil, to that list as well.

Biggest problem that most all new PCP owners have, is failure to properly lubricate the regulator. When replacing a regulator, lubricate the O rings with Top Grade silicone oil. Also add a drop or two on the fill value every time you add. This keeps the internal O rings lubricated so they...

I too am looking for parts diagram and parts list for the Avenge X

N50 Benchrest League Date: 2-15-25 Boerne Shooting Club Bench Place Pellet Slug Name Target 1 X Target 2 X Target 3 X Total X Equipment Print Setup Size RF Match 1...

I'm a little more confused now. You talk about HS 3+5, 3+10, 3+15. etc. Please explain that . My Avenge X has only one HS adjuster.

Watch out when ordering them from Amazon. I did and they are either too small or too big. I needed them for use in a Yong Heng Compressor.

Boerne N-50 January Match Canceled. Next shoot is in February

I would rather have the one like they have in S Africa. The one om EBay sticks out too far.

I recently donated my Great Granddaughter's Challenger to the AFJRROTC at her former High School.. Depending on what you are trying to donate, most are limited to .177 at 10 Meters.

I'm shooting the same rifle, but I also shoot it tethered so I always have sufficient air supply. Haven't tried the 33.95 pellets only the 25.39 at 1800 PSI with HS 2 1/2 CW. Speed runs around 856 -873 FPS STD 2. Going to try a 22 barrel and see what I can do with it. I don't have the...

They are having trouble with the web site and working to get the problem resolve. As for the mD, everyone has a problem getting in touch with him.

Only buy your Whips from a reliable source, like Pyramid Air or Utah Airguns. Don't trust the stuff they sell on Amazon.

The location of the gauge, just turned me off. Needs to be located differently