Search results for query: *

There’s not a whole lot of first hand info on this rifle. I’m curious to see some groups, preferably at 100 yards and beyond, choice of ammo and speed they’re being pushed. My brother wants to buy a U3 .30 700mm but I want to hear from some owners and their thoughts/opinions with this platform...

Ahhh you didn’t reveal that tidbit of info….good luck 👍

I’m with JaceSpace1369 it could be a nicked/cut breach o-ring.

My cheap $25 chinese chronograph that mounts to my barrel doesn’t require a light source and is reading within 2 fps of the f1 chrony when the light source is fixed above the diffusers. When I was strictly using the F1 chrony I experimented with moving the overhead lights around and it did...

I have a crony F1 and I get very inaccurate readings if there’s too much sunlight outside or not enough light altogether. Personally, I would try to set up indoors with controlled lighting, much more accurate and consistent.

Will74, out of curiosity which chronograph are you using?

Looking to trade a M3 .22 700 for your Uragan 2 .30 700. Let me know what you’ve got!

Thanks guys! It was a ton of fun to capture all of that on video. Up here in the north east we don’t see a lot of eagles so it’s a treat to spot them. If they were picking the eyeballs out of my cows and livelihood, I would probably think differently of them too.

He’s ill at the moment. Here’s the link to his thread https://www.airgunnation.com/threads/announcement-from-umair-bhaur-i-am-not-well.1328068/

A little back story…. On this one beautiful snowy day I was heading outside to do some outdoor chores. As I was putting my coat on I looked out the window and spotted a massive bird about 100 yards away up in the trees. I grab the U2 topped with an ATN 4k Pro and set my sights on him. First...

Any chance that you want to sell one to me?!

I had the same issue with my brother’s M3 .22 700 mm when it was tuned to 95% of max velocity. After many hours of experimenting I found that tuning to 98% gave the best results…no slow first shot(s)! But at the expense of less air efficiency/decreased shot count. Btw the m3 was shooting...

Sorry guys for the late response. To Derek’s knowledge the .30 barrels are still .3063

I didn’t mention it but I did use warm water. I removed and cleaned the separator and desiccant beads, both check valves in the head, as well as blew out the lines. The separator had some gunk mixed in with the desiccant beats. I threw them away and added new desiccant.

...described. As for storage, I do believe the cold weather exacerbates the issue but my cs4 was already acting up and would not pump properly in a 75* room let alone a 35* garage. After performing the flush all is working well. It’s your money, it’s your machine, do as you please. At least...

The cs4 lives to pump another tank! The original burst disc blew right before adding water to the grease pot, go figure! So I replaced it with the spare discs provided and they all burst around 3,500-4,000 psi. So I reached out to gx and asked for “less than 40 Mpa” burst discs. The package...

These AGT’s are great shooters! Uragan 2 .25 700mm shooting 37gr zans at 955 fps. Best 3 shot group taken that day in between lulls of 10-15 mph wind gusts from a bench. Target distance 96 yards. Most of the groups were 3/4” or less in light wind. I’m hooked on AGT. Excellent hunting rig...

Excellent news! Thank you for being the lone wolf! I’ll give it a shot this weekend. Did you have to add grease after performing the procedure? Half turn? Full turn? Leave it alone and continue with the normal grease schedule (1 turn every 4-6 hours)?

I’ll give it a shot, but I don’t have a lot of confidence that’s going to help much