Search results for query: *

I will have to take the barrel out of my Epic to see if the barrel itself is interchangeable since Epic told you that.

I know the tension systems are not interchangeable, very close but not exact. I haven't had the barrel out of my Epic 2. The Evol barrel is a different set up from what I have seen before. So I doubt the barrels are interchangeable. The Evol is on top, Epic 2 on the bottom.

Edgun west has the kit. https://www.edgunwest.com/store/epic-airguns/epic-airguns-accessories/item/epic-airguns-two-swiss-arca-bottle/ I have a 2 in .25 with the 700mm barrel. I am able to shoot the Altaros 60gr Queens at 860fps. That is about the max power I can get out of the gun. Also...

Hopefully they will be here in the USA soon.

I don't have any pics but I put mine on a O2 tank caddy, or a luggage caddy depending on what size tank you have.

For those of us who already have the 2024 model will we be able to get slug barrels for them in the near future?

I don't see claws so some sort of a cat.

I wonder what is under the front wrap??? At first I thought maybe external plenum like the Thomas has but looking closer I don't think so. Anyone else have any ideas? Anyone know what event this gun was shot in? That might give us a hint at what it is.

How long do you tumble them for?

Wow. I just tumbled some of my .357 135gr slugs. They were all clean when they went in. This is what they looked like after.

They might work. The Altros will feed great out of my Epic but thr slugs i make won't unless I make the dimple in them.

Thanks. I have been trying things like that. I have found that some of my rifles do not like to feed boat tail slugs from the magazine but shoot they extremely well. What i do is form the slug using the dish base die to start, then use the boat tail die. This leaves a small indentation in the...

Thanks Mike I will give it a try.

Mike, how do you tumble the slugs? Just a bunch of slugs together in the tumbler or do you use media? I have been making boat tail slugs with my corbin press and have found this issue. I found with a straight cut on the wire it helps. Also I found if you start to form with a flat base die it...

Trying to remember, its been a while since I shot a 22 short, but I believe without the extra mod it is still quieter than that. I can shoot it without it ringing my ears. Some might not say backyard friendly but with the extra mod I feel it is. Also my gun reg is set at 190 bar and shooting...

I have the Mora Sniper in .35. As most of the above posters have said mine has been great out of the box. Very accurate, and quiet. I shoot mine without the extended mod on and it is still quiet. I turned mine up to shoot 135 gr slugs at 910fps and get 2 full mags, and I got the 700cc bottle...

Some guns don't like boat tail shaped slugs. I just got a Vulcan 3 HP and the BT slugs I made so far for it, it does not shoot well. I also have many airguns that shoot them as well or better than flat base or dished base slugs. It depends on the gun, barrel and the chamber in it. And as...

Yes out of airguns. Any gun that will feed them and shoot them well I use them. Better BC than the dish shape.

The Presslug and Corbin dies are not compatible. Corbin cost more but have way more options on how to make the slug. I have both and haven't touched my Presslug since I got my Corbin. Thats not saying the Pressslug isn't great, it is, but I have been shooting boattail slugs and the Presslugs...

I have been in to the PCP airguns since around 1999. So I have a huge inventory of different pellets and slugs now, many I don't even use anymore. What is nice about making your own slugs is you don't need to buy all of the different slugs to try out. You can have a smaller inventory on hand...