Search results for query: *

Probably not the same as op asks about, but i shot 26.5gr zan (the lightest slug in .25) in my drs 600mm at 980 with pellet liner and they group good enough for me at 50 - 160m.

Hi, does barrel and inlet assembly from impact fit on mav? On pictures the inlet looks the same, and there is no measures on the shroud in front, anyone tried? I can get hold of a mav for a good price in .177, and i have 700mm assembly from impact laying around, would be nice if I could use it.

Its realy nice indeed :D just a question, would it be and option to make a hole for the hammer adjuster and reg so you dont have to take it out to adjust? 😍

Yeah, if the o ring fails i just take it out and buy a slug probe, its on the shopping list together with a 700mm air cylinder anyway. Just hope it works now a little bit first :)

Yeah i was thinking of take abit off from the probe, i also tought about opening up the liner abit but was unsure of how it will seal agains the slug/pellet. So a quick fix now was Just to take the liner out and put a oring in the to get the needed space for the probe, dont have any idea if it...

The probe hits the liner is whats the problem, I dont know if there is any adjustments to the probe so I can dial it back 2mm? Cuz the liner will have to stay where it is, and option is to put on a slug probe so the edges on the probe wont hit the liner ? Also looks like the probe pushes too far...

Ill take it all apart tomorrow and see what I can find

Its normal to cock after I get over the "bump". And it was not like this before I moved the barrel assembley where it supposed to stay. I didnt even put a slug in it.

I dont think anything is stuck cuz I can put in a slug and push it in with a ziptie the same depth as the probe should do. It shoots like a dream tho, but the hard reloading makes it less smooth.

Dont know if the vid makes justice enough for how hard it is

I did not clean anything, just loosend the 3 grup screws and pushed the barrel assembly in all the way where it supposed to be. I did not have any acc or fps issues before either, but after pushing it in where is should be i gaind 20fps so maybe the 2 transferports where not lined up before. But...

Nah, I can put in a mag and shoot normalt, except for the hard "final stage" og the lever

Hi. When I was shooting my drs today i noticed that my barrel had moved 1-2mm forward (the brass that sticks out to guide magazine was flush with the block) dont know how long its been like this, probably since I upgraded it from 177 to 25. So I let all the air out today and took off the air...

Do they have a webshop? :)

I dont think the angle has anything to do with it since the inlet port is also angled to match the valve. But when I upgraded my .177 to .25 the inlet probe did have a notch to line it up the right angle, but it was not tight so I could turn the barrel a few mm each way so I had a bit of...

On my drs the fps stoped at around 120-125bar with stock 10g hammer, I bought a huma tungsten (24g) and grinded it down to 18g and that has given me alot more adjustability with the hammer. And I dont need to max out the hammer spring so its lighter to reload also :)

Yeah ive seen it, but 700 are still in presale :/

I grinded the tungsten hammer down to 18g and that made it possible for me to push 33gr slugs at 960, I could go higher but the shotcount is around 17 with the 600mm tube. When they come out with the CF tube i will upgrde to 700 so I hope the ekstra volume and 20bar more fill will net me 25...

Is the overall CC also increasing? I have never been good at Math, but 20bar extra = 28% more volume?

And just remember when you take the power wheel there is 2 small steelballs there that are easy to loose