Search results for query: *

Has anyone received their prizes?

For .22, they currently only have .2161 and that what I received even though I selected .2173. Something it up with the .2173 and hasn't been available. Other calibers may not be an issue.

Looks like Thormolds site is out of commission. Something is definitely up.

The Thor press is made out of tool steel. Doesn't need to be large.

Pumps have seals, run them dry and they will fail. I can see how air could get sucked in on its side with the reservoir if not absolutely topped off.

You would burn up the water pump running it on its side.

It's a good thing they don't build aircraft...

26in/lbs works for me on my .22 600mm. Comes out at a 1/4" turn.

The 3 Sekhmets I have are dead on accurate, but thats about it. The software is horrible. Tested all 3 with with my SSI TECHNOLOGIES MG-9V and do a handshake within 0.25%

"Stuck screen is a hardware issue" Sounds more like poor software to me.

Less resistance due to the o-rings beat up maybe.

8 definitely gets beaten up. You will know that whan excessive air escapes through the hammer chamber vent holes. A loop always helps for how tiny these o-rings are.

I'm actually surprised o-rings 2 & 8 survived the ride.

So, is air escaping from #1. The threaded cap

2. You said "air escaping through the valve pin retainer"

That bent valve went through it not squared.

If all the o-rings are kosher, its possible the cap/ holder got damaged when the valve got bent.

Are you talking about the threaded holder.

Digital. Easy to read at a quick glance and available within a 1/4% accuracy.

Oh, I believe it. I just don't have the screw issue.