Search results for query: *

Thanks!

Plan to. I’ve got about 10 different pellets/slugs/brands and spread of weights for each of 3 calibers. Should give me a good spread and find out which pellet works best at intended ranges for each. 3 new rifles I need to run tests on. Should be “fun”

Yeah. I’ve got a 20-25 year old Shooting Chrony Beta. Just a bit of a PITA to haul around and set up. This can just slip over the muzzle and with a goo data sheet of various pellets, etc. - just Kentucky wind age and elevation from there. So I can setup range cards and guesstimate. I’ve...

Figured it wouldn't be all that accurate - so long as it's relatively consistent. I can make adjustments from there.

Just an FYI - manual you sent showed enabling wifi as a medium press of the "down" arrow button. However, on mine, I have to do a medium press on the "up" arrow. This is for anyone else grabbing the file. I have the wifi only version - manual shows wifi/voice version.

THANK YOU. I was going to start trying to get one made myself from all the foreign language videos and do the best I could. Thanks again!

Ordered and got an HT-3006 wifi version from Ali - came with no printed (or any other form of manual). Checking YT videos, several on there, if I only spoke Malaysian or Pakistani. No subtitles. So - does anyone have the manual for the HT-X3006 they could scan and send me via message, etc...

I finally found spare mags for the .25 caliber on ebay. Shipped price is same as Beeman would have charged. But Beeman doesn't even list that rifle in that caliber or the mags anymore - so no idea what's going on with that.

Well, I can say the UX Gauntlet mags won't work - too thick. Won't even be able to sand down the mag back to make it thin enough. Other than that, I believe it would have. Beeman 1359 25cal mag is right at 0.585" thick. Thickness varies up to about 0.592" as I move the caliper around checking...

Anyone know where to source Beeman 1359 (25 cal) magazines? Or an equivalent?

IN

Sorry for the delay in response - got a new granddaughter last week. Thanks for the replies

Been poking around, and found this - Bottle, any reason that won't work for an Umarex Gauntlet or Umarex Notos for field refills? Capacity is about 122 CI for the bottle. Any warning flags about the mfg? NOT DOT approved - so nobody is going to fill it - I've got my own compressor so...

Trying to install the rear sight on my Notos - but for the life of me can't seem to get the correct hex key size for the set screws. I'm assuming they are probably metric... What size are they?

Lord have mercy - hope this is the last item... Put drop or two of oil on bottle o-ring, and on probe tip and cocked a couple times to work it in. I understood Gauntlet 1 was max of 3000psi - but gauge on rifle shows green to 4500psi. Someone install the wrong gauge? I've only filled it to...

I've called Pyramyd, and they say that is normal on the Gauntlet. Obviously - once pressurized it should be tight - still not sure air won't leak with it - but we'll see.

Gotta watch 231 in "big" cases - or even little cases. Too easy to double charge one if someone walks in with those off-the-wall questions and interrupts your workflow. Not a huge fan of Lee dippers either...

Ok - pondering a bit more - I've wondered about using a paintball refill bottle. Most I've seen will require a hose kit, but wondering about something along these lines: Contestant_1 I'm not finding a rating for PSI on that one... Contestant_2 Contestant_3 Just curious about something...

Hopefully enough see this - I got my replacement Gauntlet, and inspecting it - the air bottle is loose. Took handguard off, and the bottle will spin about 1/3 of a turn more before it's basically "tight". But then - the air gauge and fill port won't line up, and the handguard cannot be put...

Yup - thought of that already - reason why I made this post