Search results for query: *

I just received a 90 cu. in. Benjamin tank. It took about 45 minutes to fill it from 0 to 4500 psi with my GX CS4 compressor. What do most of you use for a carrying case/bag for these tanks?

I recently got a Marauder Semi Auto and every time I shoot it a pretty large puff of air comes out from around the magazine. I'm just wondering if this is normal?

Every time I get out my 20+ year old TX200 I'm impressed with both the build quality and accuracy of the gun. It rivals some of my pcps for accuracy. That got me thinking about trying a British made pcp. I've got an FX, RAWs plus several less expensive pcps. What would be a good British made...

I have a 0.20 cal Condor ordered and was wondering what pellet does it seem to like? I have a good supply of 13.73 JSBs and 11.42 H&H FTTs.

I just got a Diana Bandit and the fill probe leaks. The first 2 times I filled it it was fine but the 3rd time once the pressure got up to about 1000 psi the outer most o-ring on the fill probe pushed part way out and leaked all the air. I replaced it with the o-rings that came with the gun...

A couple of weeks ago I posted that my Gen 3 0.22 cal DAR suddenly lost about 250 fps of velocity. I returned that gun to Aim Sports for a replacement. The new gun arrived today and I just shot a 55 shot string of 14.3 gr CPHPs. I got about 50 good shots from about 3000 psi down to 1500 psi...

I've posted about my issues with 2 of my DAR rifles. Well, I just got a new Beeman Underlever Bullpup in 0.25 cal and right out of the box the trigger doesn't work. It takes anywhere from 2 to 10 tries pulling the trigger to finally getting it to fire. I tried adjusting the trigger but still...

Last week I returned a Gen 3 0.22 cal DAR that I bought last September because it suddenly lost 250 fps in velocity. That gun had less than 100 pellets through it. Yesterday, I got out my Gen 3 0.25 cal DAR that I also bought last September. The first 15 or so shots were fine. I then topped...

I got a chance to shoot my new 0.30 cal FX Maverick Sniper this evening. I have the first regulator set at 180 bar and the second reg at 150 bar. I'm shooting 50.15 grain JSBs with the hammer spring wheel all the way up to number 7 and only getting a velocity of 750 fps. Does this sound right...

I've been getting frustrated lately with some issues I've been having with some of my pcps so I decided to get out my 1961 vintage Sheridan Blue Streak. Holy crap!! I was shooting 13.73 JSBs and getting 5 shot groups at 20 yards that were 1 slightly ragged hole! At 10 yards 5 shots were 1...

I have a gen 3 0.22 DAR that I bought last September. I checked it's velocity with 15.89 JSBs and it was 830 fps. This evening I shot it and it seemed noticeably slower so I got out the chrony and sure enough, it's only shooting the same JSBs at 580 fps. What would make a relatively new pcp...

Does anyone have this gun and how do you like it? I've tried searching for info but can't find much. There a few videos but are in spanish. It's a regulated bullpup in 0.22 and is just under $200 at some places.

Recently I've taken out several of my guns that I have not shot since last summer and the point of impact on every one of them has shifted by 1"-3" at 20 yards. I had each of them perfectly sighted in last summer at 20 yards. I'm shooting the same pellets, same scope, same distance off a...

I filled my new Gauntlet SL30 yesterday and all the air leaked out overnight. Is there something simple to check before I send it back??

I couldn't resist getting an ICON for $129. It arrived last Monday and today was the first chance I had to take it outside to shoot it. The problem is about every 3rd or 4rth shot the trigger doesn't engage. I'll cock it and just nothing. If I cock it again it does shoot then but I have to...

I recently bought an HW97K in 0.22 from Airgun Depot. I just tested the velocity with CPHPs (14.3 gr) and got an average of only 634 fps (12.8 fpe). I also tested it with H&N FTTs (14.66 gr) and got 658 fps (14.1 fpe) and JSBs (15.89 gr) and only got 566 fps (11.3 fpe). Are these velocities...

why people spend big bucks for some top tier guns. I've been shooting air guns for over 60 years and pcp's for about the last 5 years. My pcp's have been what I guess you would call low to mid level guns (Benjamin Cayden, Akela, Marauder, Disco, DAR). I recently decided to get a better...

Does anyone know where I can get a cocking lever shoe for a 0.22 caliber Marksman Model 70?

Has anyone bought anything from chucksguns.com? Are they a legit business??

Does anyone have any experience buying from a place called "Airgun-Us"? They seem to have attractive prices but I'm just a little nervous about buying from them. Kind of like the old saying if something seems too good to be true it probably is.