Search results for query: *

The screws on my hamsters are constantly backing out. Worried about damaging the wood surrounding the hole, and the screws not holding at all better off using super glue in the hole, letting it cure THEN putting the crews back?

In my run up to the Worlds have had issues keeping the gun below the 12 ftlb limit..... ordered a 12 ft lb spring, arrived and ,,,,,,, its bigger diamter than either of the guides/sleeves I have that the spring travels INSIDE of. The guides the spring goes over/inside the spring fit fine. Any...

My TX200 is shooting 8.64 pellets at 780 fps (55 degrees, 4500 ft ASL). Changing NOTHING else but pellet weight, is there a formula that would predict what speed, say, a 10.5 gr pel would be travelling? Would save me a couple of evenings of chrony work.... :) TIA dan

Long story short, been trying to finalize my TX200 setup for the WFTF Worlds in few weeks Ran 50 shots of 8.64 pellets over the chrony giving 780 fps avg @55 degrees F, yielding 11.68 ft lbs. Shot that string at 4500 ft ASL Now I'm a bit panicked. Phoenix is at 1086 ft ASL, Im at 4500 ft. The...

like this one? https://utahairguns.com/product/saber-tactical-fx-impact-low-profile-full-arca-swiss-rail/ Would be awesome if it did..... bolt hole pattern/size/placement seems very similar....

Over the past Christmas break I was in SLC and dropped in at UA. They have a "sun shirt" (https://utahairguns.com/product/utah-airguns-2023-sun-shirt-white-v2-0/) and I grabbed one, along with another 250 dollars worth of stuff :) I had the honor to shoot this past week end at the Nevada State...

I never win anything. So was very surprised to get the email saying Id won that week's hoodie from ZAN It arrive yesterday. The pics on the forum dont do it justice. Well made, the design even funnier in person. Since it is Montana, I'll be wearing it all year round :) Tahnx again to ZAN for...

Ordered some upgrade parts for my TX200 didnt notice the "Signature required for delivery" until after I got the conformation email... sent an email asking if they could remove that, as no one is ever home when the postal folks deliver, then it turns into a 3 day game of Tag. They did...

when you realize you have a Love/Hate relationship with it :) After the bent cocking arm incident on the TX200, back to chrony work and setting up ballistic data for the gun had been shooting 8.64's at 860ish..... which is 2-ish ft lbs over the WFTF 12 ft lb limit. some head scratching...

https://www.airgunnation.com/threads/tx200-cocking-arm-not-fully-closing.1306773/ describes the original issue, and many folks offering great suggestions. And Frank in Fairfield is the hero of this story. Frank offered that the cocking arm is hollow, thick walled tube, and likely bent. It was...

Gearing up for the FT been doing chrony work and some indoor practice. Long story short, Ive had a few pellets drop out from the loading port down into the "compression" tube not been a major issue, thats usualy me not pushing the pellet in far enough or just fumbling it (blame it on the cold...

the FT matches are still listed on the Range's website. Ive emailed the addy listed but no response... thanx dan

Have been thru the SLC area many times after they opened, always had to be some where else and could never stop. This trip though, we stayed in SLC for a couple days and made the time. Didnt really know what to expect, way cooler than I expected Saw a lot of guns Ive not seen in person...

Getting ready every spring is always a few steps forward then one or two back and the occasional do-over.... HAve a set of FX adjustable mounts. They put me on almost on target just from the adjustments in the mount. But as I put shots thru the TX200, they'd move and the gun would start...

https://www.epicairguns.com/ user from Croatia on GTA posted it.....

SO we dont have to hunt down our responses and new arguments discussions about them Lot of good info about the gun, and some good debates about the whys/why nots regarding it. All good fun reading! Just be easier if they were in one spot for a while.....

I changed some privacy settings, Default time zone was wrong, found out where to set "Dark Mode" (and its cool...) Has made the new software much better for me. Massive upgrades are always a pain, but I'm geting it dialed in.

Seems like a perfect time to unviel a new t-shirt design.... the heartbeat line with the pellet shape in it would be the schnizzle across the chest..... Black shirt, red line....... AGN logo on the back.... just saying.....

Been working ona 3d printed stock for my Chaser. Have gotten to a point I felt needed some feedback, and tried to take a snapshot and send to a friend for critiquing. Printed it with shiny black PLA.... and all the picture shows is a skinny black blob with some CF tube hanging off one end...

is the best way to show your support for the forum.