Search results for query: *

Hi, I just took out the huma air reg for Snowpeak P35 to adjust the pressure. However, the label faded. Leaving me with no indicator where to set the regulator adjustment screw at. However, before i installed the reg, I marked the label of its lowest and highest pressure with a permenant...

Hi, I just bought an FX Dreamline classic 177 with 600mm barrel, which I will replace with 700mm heavy liner to shoot the heaviest slug possible, preferably the Zan or NSA 20gr. Also I have 2 power plenums. I know that the FX dreamline comes with 1 power plenum. What happens if I add 2 more...

Hi, I have an issue with the Pellet probe screw (the screw that connects the pellet probe to the cocking rod) with my FX wildcat mk3 bt 177 cal at 165 bar with a 12g hammer weight and a 700mm heavy liner. The preload is set to slightly below max (just a quarter or half in after the gun...

Hi guys, My old fx dreamline magazine's spring has bounded up. I need to replace it with a new one. Do you know what's the specs of the dreamline magazine? Thanks.

Hi. What's your experience with changing the FX slug TP to Huma high flow v2? Permoncse increase, problems, etc. I'm planning to purchase one to shoot slug better. The other thing is how to align the slug probe correctly. I usually just set the slug pin probe to its longest setting possible...

Hi, I have an FX Wildcat MKIII BT, STX superior 600mm, .177 cal, that I want to extend to 700mm with the heavy liner. Is it possible to get a shroud and a barrel housing to get the additional 100mm so that I can save up on buying a barrel kit? Thanks. Bowo

I have a prophet 2 performance 6. 35 cal with 600mm barrel. I had the protruding pin seal of the reg blew up. I dismantled the reg and changed all the o-rings. When I filled it up, the reg adjustment screw was too loose and air was leaking from the screw. I screwed in the rag adjustment screw...

Hello, I have permission at a dog kennel. The first time I went ratting there, the rats weren't afraid of me; I was just 10-15 meters away, it didn't seem to bother them at all. I placed a red torch directed to where the bait (dog food). In just minutes, a few went for the bait, I managed to...

I just bought a .177 Snowpeak P35. The trigger wasn't the best, but it can be adjusted, such as the length of the second stage and the toughness of the trigger pull. The cocking can be made smoother too by taking out the hammer and other related parts, sanded the rough edges, and lubed them...

Hello, My FX Wildcat MK3 BT's first reg manometer shows leaking. I filled it up to 250 bar, and the pressure went down to 230 Bar within 2 days but was holding steady at 230 bar for a week. I thought it was because of the change in temperature. I left it alone for 2 weeks, and the pressure went...

Hello, Has anyone tried the Snowpeak P35 High Power Valve Kit on a 4.5 cal? What's the improvement?

Hi, I just bought a .177 Snowpeak P35 for ratting. I want to use the 16 gr JSB Diabolo Exact Beast to pack a punch while minimising the risk of ricochet or overtravel. What is the minimum speed that stabilises the pellet at a maximum of 20 metres (my farthest target) with P35?

Anyone knows the probe o-ring size of RTI prophet 2 cal 6.35? Thanks in advance.

I'm tuning my FX Maverick .22 for a 27 gr HP slug. It has a 600 mm barrel, 12 gr hammer weight, req 1 at 180 and reg 2 at 150 with a Huma pin probe. The slug performs well almost at any speed. But I'm trying to bring it up to 980-ish FPS, which the gun is capable of. However, the hammer...

Hello, I have an RTI Arms prophet 2 25 cal. Is it true that wrapping the barrel with sound dampening material inside the shroud would attentuate the sound more? Thanks.

After all the hypes on YouTube about ppl praising Fat Boy 2 as the next gen of moderator that is caliber interchangeable and the bulky but short dimension seemed to please these YouTubers with the sound attenuation without the tube extension, and the claim that the tube extension would bring the...

Hello, I dismantled the prophet 2 performance, I reassembled the gun, and it doesn't cock. I've tried to adjust the lengths of the rods, and adjusted almost everything else on the breech block. It still doesn't cock. Please help. Thanks.

Hi, I watch Matt Dubber's YouTube video about tuning for high power airgun. He mentioned that he uses a weak valve spring in his 22 cal Impact Mk2 with very high reg pressure to achieve 70 fpe with 34 gr slug. I wonder if we can use that same concept on our guns. In my case, changing the...

Hello, Have you guys played around with the fx pin probe seating depth for shooting slug? And what are your findings? Does it matter and how to find the right setting? Thanks.

Hello, I have a 22 cal FX wildcat mk3 bt, and I'm trying to find the right tune for H&N HP slug 27 gr. My gun setup is: - 600 mm heavy liner - 160 bar - 11 gram weight plus a hammer weight addition, total about 12.4 gram. - Huma tuning spring (stiffer than the FX) With that setup and...