Search results for query: *

How do I get hold of Derrick Wall?

My Edgun Matador does not hold air. It goes from a full air charge to zero in about 2 weeks if I let it sit after the fill. Does anyone fix this?

NMshooter: Brian at EDgun West confirms something to that effect. He said the Huma Regulator is built to operate at a higher air pressure than the stock regulator. He suggests filling to 250 bar would not be a problem. He's also sending a replacement Wika gauge as he thinks the gauge I have...

Tweeter: Thanks for the picture and advice. I’ll check on the nut, lube the shear and adjust the trigger pull. Come to think my about it my bolt became extremely hard to pull back and felt very gritty on the pull back. I was told that compare to the “buttery” pull of the single shot the...

Tweeter: I use Joe B’s gauge on my Guppy tank when I fill. It looks like I am about 5 bar off between the Guppy and the rifle’s gauge. I got the Huma reg just in case I wanted to shoot the 34 grain pellet in the future. I was told that the Huma reg would be better than the stock regulator...

R3.5M. 

I just received this last month. I was hoping the Huma regulator would enhance the gun's ability to shoot the 25 grain pellet. The hammer spring weight is not installed and the Huma regulator was set at 120 (The factory regulator was set at 130, but I never shot the gun with that regulator...

Yes it is scary. I’ll back out the trigger tension screw and see what happens. I came across one of Ed’s videos and he mentions this too. Thank you all!

Yes it is new. I’ll take a look at your suggestions. Thank you...

Just got a Matador 25 cal R3 with the 9-shot magazine. Sometimes when I push the bolt forward , the gun misfires as the pellet is inserted into the chamber. I do not think I am placing excessive pressure on the bolt handle as I push it forward. Prior to this rifle I had a single shot 25...

I have his Ronin on my 25 cal Matador. The difference with it on is very noticeable. He was very forthcoming and he mailed it out that same day. I highly recommend his suppressor and would feel comfortable with whatever he recommends to you.

You responses are appreciated. I finally got something out of the Alpha’s pressure release port. Prior to this I would gently release the pressure. I was told I needed to gently release the pressure so that the moisture would have a chance to escape with the air. Today, I let the air out...

Brian10956...I like the strip indicator on the replacemeny cartridge you suggested. Wonder why I don’t get any moisture from my Alpha. Perhaps it’s because I fill to a small Guppy tank so the compressor doesn’t run a long time before hitting 4,500 psi. Thanks for responding.

 I just purchased the Alpha filter for use with the Shoebox F-10 compressor. Before purchasing the filter I was told that one should change the filter when more then the usual amount of moisture comes out of the escape valve after a normal fill. I’ve run the compressor many times but there is...