Search results for query: *

Hi Wayne, I think the confusion comes from the stock, in that the SAFARI is a stock colour specifically, but many still have the 50FPE version RW which was always listed as the HP version, so to distinguish we use SAFARI to describe the 65FPE gun regardless of stock colour option. The 65FPE gun...

No problem Wayne, but actually the "standard" .22 is the 35FPE gun with the 17.5" barrel, the HP is the 50FPE with the 23.5" poly barrel and the SAFARI is the 65FPE gun. The only difference now anyways between the 50FPE .22 & the 65FPE guns is the programming, mechanically they are basically...

The BEASTS tend to shoot terribly past 70 yards, unless you can get them past 1100FPS.

Sorry Wayne, IME is "in my experience" perhaps is just a British thing, June this year would be a GCUU2, any reason you didnt plop for a 65FPE gun, the HP was always 50FPE?

Hi Wayne, the 18's work well anywhere between 780-880 IME, a good program is; LPP 130 BAR MPP 180 BAR HPP 230 BAR Voltage aound 65v should get you 150-200 shots, Is it a G1 or a GCU2 board?

Correct, the only thing you have to consider is the gun may tell you to alter the reg pressure, this is most common if you want to shoot a slug at high speed VS a pellet.

My advice would be remove the cage completely when changing the oil, apart from that the DAYSTATE unit (which is not exactly the same as the COLTRI original) is brilliant! The owner of DAYSTATE and the owner of COLTRI are friends hence the competitive price of the DAYSTATE unit which has extra...

Your main enemy is the plenum size! sub 12 IMPACTS usually run at 50-60 bar reg, the bottle reg can stay as the factory setting. Sub 12 IMPACTS come with the original very small plenum to keep them consistent, the easy fix is a plenum plug to reduce the plenum volume but of course it requires...

Fantastic viewing as always Steve! and you managed to get it out pretty quickly as well.

Apologies trlrman, I had a leg problem all the week so didn't even go near the programming, will be end of the week now if thats okay with you.

Hi Greg, we have done a few older 50 footers, you will indeed need to change the board out as the capacitors are the key to higher power than 50. However unless you have a programmer the board will need to come programmed from AOA or the gun will have to go to them, or you will need to get a...

Ok that makes sense, yes will get you the program via PM in the next day or so.

Enjoy! and I hear the food is great!

No matter what chaos the world is in right now, to see a group of people just having fun shooting airguns is priceless! Hats off to those who made it happen and to everyone to made it there and best of luck to all the competitors!

So trlman, you had to refill the gun with air "three times" to get 101 shots did I read that right? To put that into perspective I constructed a progam the other day for my .30 SAFARI and I get 70 shots at 851 FPS AVE with a lower ES, from one fill and TBH I have not yet bothered to tighten the...

The danger is that the pin breaks and is lodged under the new style magazine, this can mean a total stripdown to remove it. FYI there are actually 3 variants of the pin now, as the latest valve cores do not have the bleed path and therefore the bottom pin has nowhere to seat, it has to be cut...

Couldn't agree more Bob, a pullthrough with the barrel still in the block is a sure way to tear the breech O ring, even with a patch that isn't that tight!

Always remove it from the gun, then remove the shroud and wipe off all the muck inside, then patchworm with NAPIER spray until clean, reassemble and off we go!

A pest is just an animal in the wrong place, likewise a plant in the wrong place is classed as a weed!

Duplicate post deleted!