Search results for query: *

MIchael a reflex sight is the only way to go, but going to the rail adaptor you chose sets the sight height too high above the barrel. This sets up the requirement to hold over the target at close range. I tried several different reflex sights and mounts and I now use a reflex sight that has a...

I have stated this before, but I will repeat this fact again. Most commercial moderators have bores much larger than optimum for good noise attenuation. You do not have to take my word on this, just measure them up yourself. I have found that optimum clearance between the exit diameter of the...

As an owner of two GKi's, I can tell you that they are too powerful for pesting indoors as misses can cause serious infrastructure damage. Whereas the PP700SA is ideal and when pesting having a multi-shot gun is a waste because you only get the first shot.

Another advantage the PP700SA has is the milled rails on the side of the shroud. I took an inexpensive laser sight and modified it to match the rail with a 60 degree cutter in my milling machine. This allowed the laser to be offset 1/2" left of barrel center. This is very useful for close range...

I have owned my PP700SA for 4 years now. It has excellent balance and fit. It is very accurate. I have made no adjustments to either the regulator or trigger. It comes off the regulator below 100 bar. When loaded to 220 bar, it will allow 40 shots before reaching the 100 bar pressure. The...

I have one of those, which I really like. It is the PP700SA, but it's only $250. This FX pistol better be a whole lot more to be competitive with the PP700SA.

I use them at the higher pressures. The safety discs do not blow out at my use pressure. I also have an ACECARE 12 liter CF bottle that I use for my 300 bar guns..

Sorry, I have 2 12 liter scuba bottles that I still use to fill my PP700SA pistol. I get 40 shots fill gun fill and I shoot almost every day and a month worth of gun fills from one 12 liter bottle filled to 240 bar.

Michael, Since you mentioned steel, I do use pape 10 meter paper targets and my indoor target holder includes a steel catch can. I usually practice at 25 meters distance. In so doing, nothing lighter than 4mm steel plate survives the GK1 using 25.4 gr JSB pellets at 700 FPS

Michael, First it is a pistol, not a rifle. Pistols are typically used at short distances. The GK1 is NOT a plinker. It is powerful enough to damage unintended infrastructure. I own a V1 and a V3 in .25 and have hit pigeons at 100 meters. It is also a revolver and its munition retention in the...

You are correct of course, but stupidity is a life sentence without the possibility of parole.

There is nothing wrong with the GK1 as delivered. I have both a V! and a V3. I personally prefer the V1, but I am right handed. Both are perfect as delivered. I have shot more than 10,000 pellets in my V1 and I have not even cleaned it. I hold a 1" group all day every day at 25 meters and when I...

If you believe that, I have a bridge to sell you!

Is the POI shift occurring in the same session or is the POI shift session to session?. Do you verify the barrel to moderator alignment with a test rod? My point here is to not make any changes to anything until you know what is occurring. Right now you are only making wild ass guesses.

You pretty much get what you paid for. There is no such thing as a free lunch. The first question you have to ask yourself is how much scope do you need? It makes no sense to mount a scope that is better than your gun's best performance. What is your intended shooting range distance? How much...

As others have stated, adjusting reg pressure under pressure up or down abrades the polished surfaces. Just because you can does not mean you should..

I'm confused. MPH is miles per hour. I suspect you mean MPA which is an abbreviation of millipascals, escentially atmospheres or BAR. The gauge on your gun is marked 0 to 40 mpa. Your owners manual , that you obviously did not read, clearly states not to shoot the gun below 16 mpa. After your 12...

If you read the instructions before you use it, it warns you to not operate the gun below I60 bar.or there abouts. It won't fill because the valve is now jammed open. You caused this issue, not the gun. To remedy this, you need to disassemble the valve assembly and reassemble the gun.

These regulators are frail. It does not need much to make them leak. Adjusting reg pressure will cause the sealing surfaces to abraid. One surface is plastic and the opposite surface is brass. Both are soft materials and easily damaged. jps2486 is also correct, but what he did not say is what a...

No PCP pistol is really adequate for large animals like racoons and coyotes with the one possible exception of the GK1. Get a rimfire and be done with the problem.