Search results for query: *

Right, so when you hold the trigger in “fire” the area you marked in red “block” is allowed to drop lower which then allows the forward rim of the striker to pass over it.

Safety off, trigger held back in “fire” mode and hold it there while pushing dead center in the cavity area where the spring goes. It’s just in a bind or likely the striker is ever so slightly canted to one side. If you are in the center and the trigger is being held back it should not require...

For both option 2 and 3 brass flat head screw and 4mm silver bottom set screw, I would recommend very slow 1/4 turn increments and both of these will start to bleed at about 1 3/4 turn point. Always keep these pointed away from your face while slowly unthreading and stopping to listen for the...

So, there are 4 different ways you can degas and the one I used in that video was the same one Huben themselves demonstrated in a previous YouTube showing how to replace the open valve seal. This method is the quickest, I wanted the video to be short, and this method isn’t possible with a...