Search results for query: *

Which is why in my first post I said that depending on its age it will need a test. The op lives in the uk, there is zero chance he would be able to have that bottle charged without a test certificate is zero and even less of a chance of getting it charged if it doesn’t have working pressure and...

It’s got bisley shooting products label on it. Also, it will either be 208bar or 300 bar. If 208 it can’t fit a 300bar din charging connector. The AAs410 has a recommended 190bar fill. The fact that it has breathing air written on it means nothing unless you actually intend to use it for...

Yep it’s fine but depending on age it may need a test Bb

^^^ this^^^ Also .30 moderators tend to be enormous in an attempt to quieten things down because they use a lot of air. .177 are much more frugal so don’t need a moderator anywhere near as big to be effective. Bb

What do they tastes like? Bb

The reg may be letting by allowing full pressure in the block, this will make the valve more difficult for the hammer to knock it open. Shoot until the pressure drops to see if velocity increases Bb

I am with you on this👍 I also don’t understand the fixation on power, more noise, more air, more expensive, more stress on components and you need to be much more mindful of where the slug lands in the event of a miss or pass through. How much power do you need to kill a sparrow, starling...

The only guns I have ever had poi shift was an airarms s400 that had a barrel clamp, if knocked hard it could move but other than that, it would stay zeroed. The other was an fx impact, now that was plagued by poi shift EVERY time I took it out of the case, if I touched the shroud and even if I...

The air tube was full and they are sub 12fpe airguns

Yep, bigger plenum allows for lower reg pressure, less hammer load and more gently firing cycle. Also as soon as the firing valve opens and the plenum pressure drops the reg opens and a tries to maintain set pressure until the firing valve shuts. The hole in the raw push pin disc is quite...

They aren’t really needed for power but for increased shot count and lighter hammer load at the same power due to the lower reg pressure. I maxed out a raw .357 with a 81grn pellet at 960fps without a plenum but cocking effort was high and shot count was terrible. Agreed, I made one and didn’t...

You are correct, a short fat moderator is not as effective as a longer version and .177 are less air efficient but with a custom moderator I can always get a .177 much quieter than a .22 due the holes in the baffles and endcap being smaller. Bb

For no reason after a few dozen shots the gun goes bang and dumps all the air out of the barrel. Initially it was thought the reg pressure was too low so that was increased but it did exactly the same thing.

I made one years ago, I didn’t like the way it moved the weight further forward but that was before the availability of carbon buddy bottles.

S/h Theoben rapid Bb

As above

As Margaret Wolfe Hungerford famously wrote “Beauty is in the eye of the beholder” Or as my mate Mick quiet eloquently described it “that has fallen from the ugly tree and hit every branch on the way down” Bb🤣

It seems to me that comparing prices from one country to the next is a bit pointless. I may pay more for an airgun but less on groceries. More on fuel less on medication. I may earn less but have more vacations. Also prices in some countries include taxes, in others the tax is added at the till...

I hope the pro doesn’t have the same reliability problems as the standard version. My shooting partner has had a refund after his drs was sent back for repair twice within a month and another friend of his drs has also developed the exact same fault and is currently back for repair for the...

Flip a coin, you get good and bad barrels regardless of price. Bb