Search results for query: *

I've ordered from them. It takes about 3-4 days to ship. Have patience my friend.

I try to remove the ferrule (cone shape) but it's stuck on the ss tube so tight. It won't even budge. Are there tools to remove this thing without cutting the ss tube or cutting the ferrule? I search ferrule remove tool but they only show faucet ferrule removal only. Not ferrule that are use on...

I believe it started leaking after I removed it so I can take the gold filter out to clean. Cause it didn't leak b4. After I cleaned the gold filter I install it back and put all the fitting together. Then turn on compressor to check for leaks and that is when I notice hissing noise from that...

I used 2 adjustment wrench. I make sure the cone shape went into the hole and seat, then tighten it down to the point it will round off the hex nut if I try anymore. It is as tight as I possibly can without stripping it. I check the fittings and they look normal, no scratches or marks on the...

So my hatsan light compressor is leaking from this fitting. I have taken it apart and polish it and put it back as tight as I can but still leaking. This is the only part it is leaking from and I can not stop the leak no matter what. What is these steel pipe fitting call? I notice they have no o...

You do know the impact is the gun that won most of the competition right? Nuff said lol

Yeah looks similar. Probably same internals since most of these Chinese made compressor are made from same factory and rebrand under different names. But for $240 and free shipping it's hard to beat. Wonder if it's actually made by the same yong heng company that makes the blue case compressor...

I use my own compressor so i bought the acecare 6.8l tank. I got the acecare Tank by itself and order this fill station. It's small and compact. Show both bottle gauge so you know what the Tank pressure is and also show pressure going into your gun. It have a quick fill so will fill any pcp with...

Ok so I run into this yong heng while looking for a compressor. It is not the water bucket yong heng everyone is used to. This one looks like a clone of the gx cs4 without the water cooling. Looks like a desktop computer. I can not find any reviews on this new compressor. I am guessing it's new...

3900 fills from a 80cu ft on a 580cc bottle? What planet are you from cause I wish I got that many refill lmao. Most you get is about 7 refills. Not 3900 fills.

Acecare and tuxing are basically the same thing. Just different branding. If you have your own compressor you can't go wrong with either. I've been using 6.8l acecare from aliexpress for over 7 years with no problem. Only thing is these tanks are not DOT so you can't get them hydro test or fill...

I have a mk2 and m3. I leave both on slug port. Slug port will have a larger transfer hole so more airflow and power. But can still be use with pellets by lower power wheel or turning valve by the bottle inward. As for 5-10 bar creep is normal. If you have a chorny and measure your shots, the...

This is why I keep telling newbies, the fx impact or any 2k-3k gun shouldn't be their first. Newbies buys a new fx impact m4 and brag about its their first pcp. Like wtf. So what. Lmao. Then they cry how to turn it. How to fix leakings, reg creep. Ect. My first pcp was the benjamin marauder. I...

I like the list of ring for each kit but paying $11.50 for like 4-5 tiny o ring. You can get o rings at oringsandmore.com for like a pack of 25 o rings for $1. Smh.

OP need to fix this title. The fx impact m3 is $1638 for the 600mm and $1690 for the 700mm. Not $1474. Here is proof.

Ok thanks for the link. Hope change out this o ring will fix it.

If you talking about the 2 small o rings on the adjustment screw, I don't have any and local place that sells o rings don't carry such small o ring. Only place I know have them is utahairgun but their shipping is $10 for such small o rings. Wondering if anyone have a problem with their reg...

Ok guys I need some help or advice here. My fx impact m3 .22 cal have a super reg creep. This isn't your 5-10 bar creep that everyone is having. It came with the plastic piston. First reg is deleted so this is about the 2nd reg. So I set reg to 100 bar. Each time I take a shot, it slowly go back...

So I search donnyfl. He makes adapter that screw onto the m20 and makes it longer. I don't want to make the shroud longer. Also its $50. For that price i think the shroud alone cost about the same. Would make more sense just to get a new shrond in 1/2 20unf. I was thinking fx might have that...

Anyone know where I can get this part. I have old fx impact with m20 thread. I wanted to convert it to the 1/2 unf without buying a whole new shroud. But I can't find this part or know what it's call. I'm guessing you call it front shroud mount or something? I try searching but can't find it.