Search results for query: *

Ya... I had a dreamline tact with 500mm barrel taht I sold a few years back to buy a wildcat mk3 bt. The reason that I'm buying the classic 177 is because of the 30% discount on clearance sale and I never have a classic stock airgun. And I have a 700mm slug barrel, a slug pin probe and 2...

My fx dreamline 177 with 600mm barrel is otw. I have a 700mm slug barrel and 2 plenums and i will install them. I want to shoot slug with good shot count, at least 2 mags. You mentioned that you might be shooting 20.5 gr NSA. May I know what's the reg pressure you are at and the result...

Hi. Do you have the measurement as a reference of where to drill the hole? And how large the drill bit should be? Thanks.

I forgot one thing. For the classic, I have to take out the gun out of the chassis to adjust the hammer. Is there a way to access the hammer adjuster without taking out the chassis? Thanks

I watched the 901 YouTube about adding second plenum doesn't do much to gaining power. Since I have two plenums. Wonder what the downside is if I install two more? I agree that FX Dreamline is not a powerful gun and the air tank is small anyway to get good shot count with hot setup. I'd...

Unfortunately it doesn't show the highest pressure....

Hi, I just took out the huma air reg for Snowpeak P35 to adjust the pressure. However, the label faded. Leaving me with no indicator where to set the regulator adjustment screw at. However, before i installed the reg, I marked the label of its lowest and highest pressure with a permenant...

Hi, I just bought an FX Dreamline classic 177 with 600mm barrel, which I will replace with 700mm heavy liner to shoot the heaviest slug possible, preferably the Zan or NSA 20gr. Also I have 2 power plenums. I know that the FX dreamline comes with 1 power plenum. What happens if I add 2 more...

On my FX heavy liner shooting slugs. I found that I got slightly better accuracy with clean barrel. So I clean my barrel by pulling just 1 dry patch every 100 or 150 shots. But it's not a magic number. I'm sure that some barrels perform well when it's dirty.

Hi @MongooseV8 , thanks for the tip. I'll try ot too.

Thank you so much for the offer. I really appreciate your generosity. Unfortunately I live in Indonesia, the postage would be very significant. But your good idea about upgrading the steel material is what I'll try to do with the help of a local machining shop. Although I doubt they can do a...

I see. I don't know how the size of the screw probe. Do you happen to know the size so I can buy right sized grade 8 screw? Thanks so much.

Is it stronger than the original screw and fits snugly into the pin probe pin so that I doesn't wobble when the gun is shot?

Hi, I have an issue with the Pellet probe screw (the screw that connects the pellet probe to the cocking rod) with my FX wildcat mk3 bt 177 cal at 165 bar with a 12g hammer weight and a 700mm heavy liner. The preload is set to slightly below max (just a quarter or half in after the gun...

Should be because your reg is low. I don't have Panthera nor DRS. But I have wildcat mk3 bt, more or less a Maverick on wildcat stock with 700mm heavy liner, reg at 155 bar and I'm using the 12g hammer weight with the preload at max (until the gun won't cock) and then give it a full turn in...

The spring is squashed, the coils are one on top of the other. I tried to place the spring into different 4 slots and I can't feed the last half of the pellets. It doesn't cycle and I have to give it a tap to get the wheel to turn and get the pellet into position. I tried to lossen and tighten...

Hi guys, My old fx dreamline magazine's spring has bounded up. I need to replace it with a new one. Do you know what's the specs of the dreamline magazine? Thanks.

I might try to swap the hammer to the 11.5g, max out the hammer tension on power wheel 5 at 140 bar and incrementally adjust the reg up to about 150 bar. I think you should find your max fps without destroying the gun. I would even try to play with the Zan 22gr and 24gr too. I hope it helps.

Interesting. How do you set the pin probe length correctly?

Hahahaha. Nicse one. :)