Search results for query: *

https://www.rtiarms.eu/docs/mora/manual

get a chrono quick before you get 5 years inside. a 30g with 130bar will be well into firearm territory. put the reg back to 50 bar to start with and use an 18g pellet and see what readings you get

any tuning on a sub 12 would put it way over the limit,what fps and pellet weight is it doing now

my one is now producing full power,rti most likely send them to the uk choked off to keep to the uk limits. the importer had not reversed the valve or the hammer restrictions to suit the license i have. i think your video showed you had to alter the valve too. the 34g hn are proving to be very...

will do,should be easier to tune now;) Rok does read up on here so we will be kept right(y)

maybe so the same valve system can be used for different power levels in different markets. seems well made parts compared to other guns i have.

now i have the speed sorted, that will be next

found the issue,looks as if the importer has indeed put a part sub 12 tune on it.by turning the valve seat to the restrict side. thanks droogmole and Rok for the help and suggestions the valve train looks as if its been modified in the newer versions compared to your one droogmole so...

it might be worth having a look at that valve,its still under warranty as i have only had it a month. does the whole valve come out at the trigger end and does the black threaded part come out the opposite end hopefully Rok doesnt mind me checking it out i can get higher fps with bumping the...

so did i,i bought it as a heavy weight slug shooter but my redwolf hp a better power/shot count. has to be something choking it

some pics of the phutphut,muzzle end without the moderator, hopefully its arriving soon not a heavy weight slug shooter yet,but hopefully can find the cause of it having the flu

seem to be going backwards from first time out with the 34g mora 34g 2nd reg 140 bar 40 shots to go from 300 bar fill to 200 bar turned the dwell in from fully out one turn every 5 shots,went south on the last 5 H&N Heavy Slug .22 Slug 34.0 gr Shot count: 15 Low: 800...

i think the different grips are what some have changed too, the muzzle endcaps look different depending on if the moderator is fitted or not. todays testing will be trying it at 140 bar and see what speeds can be attained, although the first time i tried it at 140 bar it would only average 850fps

i can answer this one,accuracy so far is top drawer,70 mts with 25g ko at 990 fps power for air pressure set is where im not getting it right at the moment compared to most of the guys on here. could be gun but most likely will be the operator.

it looks as if the center part is different now,you adjust this one with 6mm allen key or metal rod through the holes,its too stiff to turn with your fingers. if its turned out more, speed drops and noise goes up,maybe too much air going out slowing slug

3 turns out from fully in,futher out drops speed

as you and shaman are on here,its proberly easier to post here than mess up shamans youtube channel. chrono info mora 34g using 170 bar H&N Heavy Slug .22 Slug 34.0 gr Shot count: 5 Low: 895 Hi: 914 Avg: 904 STD Dev: 6 Spread: 19 1/12/25 1:49:59 PM,902,FPS,61.5,FT Lbs, 1/12/25 1:50:20...

im in the uk,it came as set from the factory i think,the tamper plate for the hammer was locking it off and had anti tamper screws in it. maybe the importer has stuck a sub 12 tune on it :eek: will have another play when the temp comes up a bit,well below freezing at the moment

chrono reads correct on other guns. has to be settings or barrel needs run in a bit the reg pressure should dictate the fps as the hammer and valve are for fine tuning

its 217 dia i have,i think i saw somewhere that the 218s are too tight