Search results for query: *

Although not ideal, the reg plenum and the valve don't have to be screwed in until they touch and bottom out. From where it bottoms out you can unscrew it to line up where you want. When you fill up it will hold tight in that position. It will only feel loose when completely drained of air. The...

I don't know if they come with black magazines as standard now but they used to be red and now you have an option of black. I believe you can specify the colour you want now (black or red). You can also order handguards and moderator kits in red too depending on who you order from. The numbers...

Mine shot awful out of the box too. I have a 250mm .22 cal. But with a Walther barrel. I changed a lot of things to get it in a good place! Mine came in a pretty much default set up as it was one of the first batches to be sent out. So 130bar reg, stamdard plenum and jets. One had a "7" marked...

Yeah, I think so long as you dampen the shock waves from that initial, "crack" then you're good. It tends to be that crack that echoes and rings causing the main noise problem. I tend to shoot mine from quite an enclosed area so the M50 stops a lot of that ringing and brings the noise down quite...

Yes, I had this problem the first time I tried changing to new valves with less dwell time (bigger holes, shooting sub 12ft pounds) . I doubt it's a regulator problem. If you adjusted the trigger stop at all I'd try to reset that back to where it was before. Then I would take a look at your...

I find getting a good speed loader so you don't have to remove the mag at all will help. If I do remove the mag I do push down the indexing arm when removing and replacing it. I also do that with the locking lever when folding and closing the gun. I think I only ever let it click shut the first...

I think if you have the inserts and find the noise difference a lot quieter than stock then it probably won't get much better than that to be honest, especially with a 250 barrel. I haven't tried or bought more stacks for my Mod50, which may possibly reduce noise further, but I fear it wouldn't...

I have one of the M50 kits. Got it direct from Huma. Here it is on my 250 barrel. I'm shooting .22 calibre sub 12 ft pounds as I'm in the UK. It is still quite loud but for a Leshiy 2 it's quiet if that makes sense! If the stock looks a little long it's because I'm running 2 connected plenums...

No, the plenums can screw into each other. I got a compact butt stock to compensate for the length and added a compact plenum to a standard one (I can make it shorter still with two compact plenums together instead but this is actually fine length wise) each plenum has a regulator in it. 

Your groups may improve further if you use two regulators. One set a at about 130bar in a standard plenum going down to one set at 100bar in a compact plenum before the valve block. I'm already doing this with a standard regulator set at 130 and a huma regulator set at 100. The groups are amazing! 

If your wife, daughter or girlfriend have any spare hair bands, I'm sure they'll do the trick. 

https://www.huma-air.com/Modular-Air-Moderator-MOD50-4/0-With-Adaptor-Leshiy-2-250-Set You can get the Huma Hornet addon direct from Huma Netherlands now. 

Okay, I thought I'd put up something a little different. This is my Leshiy 2. 250mm barrel .177 set up with a Deben whisper moderator that fits nicely in the handguard with a 1/2 UNF adaptor, in the UK 🇬🇧. We're limited to 12ft pounds here unless you have a firearms license so we look at air...

It takes about 5 minutes, quicker depending on your moderator set up. 

The last issue with the valve bead was interesting. I've had issues with indexing and always suspected the valve jets as it only happened when I changed them. However, I did open up the valve part to see if any dirt had got in and to give the parts a clean. I did notice on mine the bead that the...

I have a .22 250 barrel. Reg came set at 130 with 0.7 and I think 0.1 jets (there was no number on it and the 0.7 one had "7" marked in it in sharpie, not etched). I had this combo with the reg all the way down to 70 and 50 until my new jets arrived. I got the valkyrie reg tester just before the...

I had a similar lock up/no mag rotation. It happened after changing valve jets. I ordered a whole set to experiment with and found problems with it cycling on most new combinations but not on the original factory set jets. On closer inspection I noticed on a lot of the shots it sounded like the...

I had a similar lock up/no mag rotation. It happened after changing valve jets. I ordered a whole set to experiment with and found problems with it cycling on most new combinations but not on the original factory set jets. On closer inspection I noticed on a lot of the shots it sounded like the...