Search results for query: *

May be a dumb question but can you fill the CF tank on the EVO with the valve closed?

The thing about Skout is, they will bend over backwards to help you and send out free parts and handle shipping etc...I get them the next day. I don't remember FX doing that back in the day. Of course we worked through the US distributor at that time, not naming names.

I have faith in it. Like all new guns they have growing pains. I had one of the first Impacts. Boy was that a growing pain mess.

SKOUT sent me an upgrade brass part that replaces the filter in the reg. Keith of SKOUT said that imperfections in the filter was messing up the oring in the MKE-103.

Dry firing in this case isn’t working. It has in the past but not this time. Also I can’t get up to 3000psi to try and seat things. Air is rush out as fast as it is going in. Question: Can you fill the tank with valve closed?

Hi, My Evo HP regulator began leaking badly when trying to go from 1500 to 1800-1900 psi. I took it apart to find a blown internal SK-OU9009 x ring in the MFE-103. I bought an o-ring kit from Skout as I had every ring EXCEPT that size. Skout overnighted the kit and included new MFE-103 PLUS...

Well darn. I was going to up the pressure to 1800 shoot .25 slugs for test the other day and air started hissing out of the HP reg. I'd shoot it and it would stop for maybe half a second and than start hissing again., Couldn't make it stop so depressurized the gun and pulled out the reg. I...

Gotta be the Kalibrgun Cricket. Just a reliable gun. Comes out of the closet after sitting months while I try the new dangled flavor of the weak gun and bam…. No leaks and still holding zero. One ragged hole at 50-60 years. Simple design with very few orings. I often ask myself, why didn’t I...

I own among others, two impacts, a Gen. 1 Cricket an a SKOUT Evo. The Impacts are the least consistent and most frustrating. The most accurate Evo w the .22 LW barrel shoots a single small 5-shot hole at 50 y, (when I’m “on”), and the Cricket used to be a strong runner up until I had it...

Your ES/SD looks a bit high. See if you can retune to lower those numbers. That can have a big affect on groups. Maybe slow down? Also 2000 psi for 820 fps in.177? Those numbers seem off. I’m shooting 22.07 gr .22 pellets at 960 fps for with the regulator set to 1450 psi. Thinking your trouble...

That ES/SD looks a bit high for me and could have an affect on your groups. Perhaps try dropping your speed? My Diana springer gets around 10 for ES. My pcp gets around 4-6 for ES. I like using H&N Field Target Trophy in my .22 springer. You can get those pellets in different head sizes and...

An interesting read. I too took a leave of absence from airgunning for two year for the same reason. I came back last year with a new outlook and a new gun. I think that the old gun had more of an effect on my decision to quit. I was constantly tuning and retuning but just never achieving my...

I’m seeing some changes with barrels on the SKOUT Site. Gone or the 30 Cal ECR and subMOA. In their place are the 28 inch LW barrel and a 25 inch TJ barrel. Does anyone know anything about these new barrels or have they used one? Thanks

Gen 1 Marauder. Still have it. Great, accurate gun.

Ordered the 0-ring kit. There was a bit of discussion on this thread about degassing the gun between shooting sessions to take stress off the o-rings. I haven't been doing this but decided to start. The last time I shot, the gun clocked at 984 fps with an ES of 10 and SD of 2 fps. After...

Not to mention that this Compact is ACCURATE! Luke hit a fly at 50 yards on shooter 1721!

So to get this straight, replace the SK-OU9018's and the SK-OU9016's. What is the corresponding size number for ordering the 90 Buna rings. Are they neoprine, Nitrile? Do you have a link? Thank you.

I couldn't find a maintenance section on AGN so am throwing it out to the PCP guys. I have a Gen 1. Kalibrgun Cricket. The HST is stuck in it's channel and, it being made of plastic, is now stripping when trying to remove. I've tried adding a little penetrating Kroil to soak into the threads...

I've got the Evo in both .25 and .22. I've had a bit of reg creep resulting in slowly climbing velocity and the LP side seems to max out at 160 at lower HP settings. (1400 psi). I've gotten comments that 150 psi is fine for those settings and I am inclined to agree. Anyway, I'm interested in...

I spoke with Keith in support and he said that if you follow the basic rule of the LP being 10% of the HP you’re good to go. Bill Gardher prefers the 180-190 setting at any pressure ( if I understood him right). Im getting good ES and SD numbers at 160 psi. So I guess it’s good. I do have a...