Search results for query: *

And I'll expand, the R7/HW30 is at the lower end of the power spectrum. I really can't fathom a heavier pellet than an 8.4g regardless of tune. 7.33-8.4 is the spectrum for that platform. And it can be an absolutely fantastic shooter in that range.

My observation is there's a sweet spot for velocity/accuracy and most rifles are happiest in that range. Maybe 750-800fps matching pellet weight to power plant? Shorter range 10m being lower. Your mileage may vary......

I have a 25 year old Mac1 Steroid Benjamin and it sure doesn't look that one!

I have an R7 with a fresh ARH kit/guides and Vortek seal that shoots right around 7#. I would call the shot cycle "rather snappy". My HW30 has the Vortek PG4 kit and Vortek seal and pushes up to 7.5-8# depending on pellets and I'd call it "clean and crisp". That's all a bit subjective, but the...

Thank you, sir. I sure enjoy my range time and the privilege of owning some quality airguns.

Put an ARH kit and piston seal in this one. It's splendid.

A little more shroud detail. Maybe someone will recognize the work? The sight cover looks like your JM/ARH pic.

Mine looks a lot like this. Does the barrel diameter reduce an inch or two before the breech/pivot block?

10m range in the shop so there's a few things there to play with. The R7 is more often the grab and go to do some quick outdoor plinking. It is a neat rifle. Hopefully getting it sorted out.

Thanks. It's not decked out like a most of my fleet but makes a great shop rifle. I bought it with the sleeve and cover and tuned it up with an ARH kit and Vortek piston seal. Previous owner thought it could be a Paul Watts set up. I wish I knew. Just trying to make it shoot to its potential!

A quick project update. Parts arrived from AoA yesterday. I carefully sized the forks using the micrometer. All went together perfectly. Gave the mainspring/guides an inspection, cleanup, and lube. Feels good, sounds good. Will shoot some targets when the weather cooperates. Thanks to all for...

I have some of Karl's fine machine work on the rifle rack and can confirm his skill and attention to detail!

These are definitely not smooth and flat like they should be. I'm going to get some new shims and work on the fit as suggested. Thanks!

Very good information. Thank you for sharing it.

Great info. Thank you! I’ll get this R7 sorted out. Warm days are coming!

My shims are a little distorted and measure around .06mm which I thought was maybe a little thin. The barrel tension is pretty loose even under a fair bit of bolt tension. I’ll try new washers or double washers if i have to.

Thank you!

Thank you. I had been reading through that and it’s a great reference. I appreciate it.