Search results for query: *

So on the bottle version, it says, cylinder 230 max fill, CF bottle 250 bar max fill, how does that work?

WIll this be available in the UK?

the reg setting out of the Box was 120 bar

Its recently new, I'll remove the barrel to take a look

I went up in stages, I got to max, it made about 30fps difference from setting 1 to setting 23, I then tried increasing the quicktune and this made about another 25fps It's running at 750 FPS max I have the M3 Impact in the same barrel and calibre and i can easily get it to 1000fps It's almost...

Yes I understand that, but surely with everything maxed out on the hammer side, I should be getting more than 750 fps, As i said in my previous message, adjusting the power wheel make hardly any difference to the fps, whether with the power wheel or quick tune.

Hi Guys, I have a Panthera 700mm .25 FAC , it is under powered, using 34gr H&N slugs Reg pressure set @ 130 bar, and the power wheel on 23 with quick tune on 4 I am only getting 750fps, the Brother of my friend has the Identical rifle and with the same setting it is doing 1020fps. I have checked...

Solved this ages back on several of these DS35 models, set the X &Y to 0 then go through the mag range, if you can see the lazer targeting box in both high and low Mag, there is nothing wrong with the Scope, Its the mounts on the Rifle that are to blame. the Laser pointer stays in exactly the...

You must have a special one

Yes you're right! also every farm they get to they setup by zeroing from a bench first, this happen every time, it's not real world stuff is it, When I go out hunting, I don't seem to enough room in my backpack for a zeroing bench, but then my 20 year old Rapid 7 doesn't need rezeroing every...

Don't mess about look for a Hills EC3000 or EC310 EVO 500cc from empty in about 5 minutes all the spares are available, designed and Built in the UK with locally built parts.

When you own 7 Air rifles of a certain brand ( Theoben Rapids of varying models ) , that never shift zero from one year until the next, checking zero doesn't seem much point, however you are right you should do it, But with an Impact it seems you must check zero before you shoot at anything at...

What a load of rubbish about cleaning the barrel, what about when you fit a brand new liner aput put 50 rounds through it to lead it up and the POI still shifts I have a Rpaid 7 that I have put 50,000 rounds through it, I have never cleaned it,and the POI never shifts from year to year, unlike...

Been filling mine to 300 bar from Day 1, no issues other than the standard POI shift, which I have sorted out now.

Yes, I replaced both of my regulators with Huma regulators 1st Reg set at 180 bar 2nd @135 bar, I can leave it in the gun cabinet for 3 weeks and check the reg pressure and it doesn't move< I want to just pick up and shoot I haven't got time to spend 30mins zeroing before I use it. My Rapid 7...

I had this same problem, and done everything that you have done, my first area of concern was the 3 bolts holding the Scope rail on, 2x 4mm tiny bolts and 1 x 5mm bolt this seems very weak, especially the first thing most Guys do is add a Sabre tactical front rail which puts even more stress...

IN

Which barrel did you fit? I have a .30 Bobcat mk2 which is in need of some love:) would be great to update her.

I have a .30 cal Bobcat Mk2 its rated at 250bar max fill, Don't waste money on slugs, I tried them in mine and I couldn't even hit a sheet of A4 paper at 20 yards, the smooth twist just doesn't spin them up fast enough, JSB king heavy mk2 would be my choice in a .25 cal

Just cut off a piece of O ring , then push it in the hole and put a M3x4 Grub screw in to lock it down without damaging the threads, Any o ring with a 3mm thickness will do.