Search results for query: *

300mm .22

So are there any versions like the UK limited ones that shooters use while this screw is installed all the way in ? I'm afraid to shoot while it's tightened in

So it's 100% healthy to fire while the screw is tighten in ? It will just decrease the power and that's it ? I converted my panthera to a pistol so I need to shot sub 30 meters 15fpe is enough for me. The bad thing is when I remove the screw and try to adjust the reg and hammer to get low...

Hi, I have a panthera hunter compact.22 The seller told me I should uninstall a screw on the receiver to be able to shot the gun. He said I can only dry fire it untill I remove the screw if I want to shoot projectiles. The screw is right above the serial number. The question is, will it really...

Thank you for the tips

It did, that's why I decided to post the problem here. 😔

Problem is at 115 bar I don't feel there's a difference at velocities between power wheel on the lowest or mid or max At 13.5g light weight pellets. Which is not what I think is default or normal.

Problem is at 115 bar I don't feel there's a difference at velocities between power wheel on the lowest or mid or max At 13.5g light weight pellets. Which is not what I think is default or normal.

How many shots you get from such settings? Thank you

Hi, I've been arguing with someone about how many shots you need to fire before the 62cc micro plenum of the FX PANTHERA HUNTER COMPACT bleeds. He said that a good rifle will bleed in 1 or 2 shots. I said that according to power settings of reg and hammer wheel it can get empty after 1 or 2 or...

Yeah I read that on the manual before I started using the gun, I used the settings you suggested, still I have the same problem, the whole air in the 62cc plenum is released in a single shot which is not normal. At 115bar and low hammer settings the plenum should give at least 5-6 shots. What...

I found out the problem, When I remove the tank I noticed the plenum bleeds after 1 or 2 shots only compared to 6-8 shots before that error. So what's wrong that makes the whole plenum air goes out in one single shot ? Is the plenum valve is not working or the hammer hit so hard for some reason...

It rotates as normal but I do feel the power is really high no matter what I set it to low numbers. The weird thing is that I noticed when I uninstalled the tank I shoot one or two shots to bleed the plenum while back in the days I was shooting at least 6 shots to empty the plenum at the same...

Hi, About the FX PANTHERA macro power adjuster wheel. I wonder is this designed to be rotated both ways clockwise /anti-clockwise ? What's the correct recommend official method to rotate it as I feel like it's stuck at 23 no matter I set it to low numbers 😞

Thank you for sharing such results I see you started with 640 average fps So did it came set to this speed by default out of the box or you increased the hammer spring tension to squeeze 50-100 more fps? Thank you

Hello, about the .22 hunter compact 300mm, what're the tune settings you suggest for max accuracy ? Can you please share your experience ? Especially with light pellets 13~16 grain. So please share the weight, diameter and brand of the projectile and the reg & hammer wheel settings. Thank you 😊 🙏🏻

I had the same exact scenario and the fix worked for me, thank you.

May be upgrading a tank ? Or may be you overfilled it to 310 bar or so ? Etc

Not leaking at all sir.

I need to degas the bottle for other reasons.