I'm looking for the correct adapter to put a donnyfl moderator on my Crosman 1720T. Emailed DonnyFL and PA but neither knew for sure. Can someone point me to a source for this adapter?
1720T Moderator Adapter
- Thread starter scottg0814
- Start date
The shroud end should be the same as a Prod, if I'm not mistaken
donnyfl.com
If you look up the Pistol Marauder and 1720T EVP's, the part number should match for the shroud end cap. I'd check for you, but I can't at the moment.
Benjamin Marauder Pistol (Prod) 1/2 x 20 Adapter A17 – DonnyFL
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter, it will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24. The Sumo 1/2 x 20 is my favorite suppressor for this gun. However, in order to fill this gun with the Sumo, you'll have to remove the...
donnyfl.com If you look up the Pistol Marauder and 1720T EVP's, the part number should match for the shroud end cap. I'd check for you, but I can't at the moment.
Upvote 0
@UCChris that is correct, Prod and 1720T both use the same barrel shroud (2220-009) and thus the same moderator adapter.
@scottg0814 just remember that if you stick a large diameter moderator on the end of the standard shroud it can cause the problem of not being able to fill the gun without removing the moderator each time. I bought a 3D printed moderator from Buck-Rail that is specifically made to fit the Prod / 1720T and it works well and is very inexpensive. Costs less than just the adapter from DonnyFL. Here is a link to that moderator if you are interested...
buck-rail.com
@scottg0814 just remember that if you stick a large diameter moderator on the end of the standard shroud it can cause the problem of not being able to fill the gun without removing the moderator each time. I bought a 3D printed moderator from Buck-Rail that is specifically made to fit the Prod / 1720T and it works well and is very inexpensive. Costs less than just the adapter from DonnyFL. Here is a link to that moderator if you are interested...
Benjamin Marauder Pistol Suppressor Kit
Benjamin Marauder Pistol Suppressor Kit We now have two suppressor options for the Marauder Pistol. We offer an aluminum threaded adapter from DonnyFL HERE that allows for mounting our highly rated…
buck-rail.com Upvote 0
@UCChris @cwcarrera Exactly the answer I was looking for, I've heard about the moderator issue so pointing me to this moderator option is icing on the cake!!
Thank you guys so much!!
Thank you guys so much!!
Upvote 0
Correct. This is the adapter (from DFL) to attach your Donny or other mod. I'm currently using it to attach a Donny FL Sumo on my 1720T.
It says you don't need "to remove the supressor to fill the gun". I'd love for someone from DFL to show me how they do that.
Bout' a 1/2" or so too short and the air line coupling hits the back edge of the mod.
I have to remove the Sumo every time to fill. Maybe with a supressor that has a taper at the threaded end it's possible.....
Or, if you go with the Hill 8" mod. you don't have to take it off every time to fill. And the adaptor is built in as part of the moderator.
Sound level is ever so slightly louder than the Donny FL Sumo.
I'm not using it now, I just use my Sumo. So, if you have any interest either PM me or I can list it in the classifieds.
It says you don't need "to remove the supressor to fill the gun". I'd love for someone from DFL to show me how they do that.
Bout' a 1/2" or so too short and the air line coupling hits the back edge of the mod.
I have to remove the Sumo every time to fill. Maybe with a supressor that has a taper at the threaded end it's possible.....
Or, if you go with the Hill 8" mod. you don't have to take it off every time to fill. And the adaptor is built in as part of the moderator.
Sound level is ever so slightly louder than the Donny FL Sumo.
I'm not using it now, I just use my Sumo. So, if you have any interest either PM me or I can list it in the classifieds.
Upvote 0
Not an adapter but works well : https://ssl.tko22.com/Section2.html
at least that's what I didnt hear.
John
at least that's what I didnt hear.
John
Upvote 0