My original main spring broke around the 1300 pellet mark so it was a good excuse to get it detuned and have the trigger polished up. Bought a Maccari Adjustable tune kit and sent it and the gun off to the guy who was doing the work for me.
He polished everything thing up installed the kit along with needle bearing , reduced trigger spring, reworked the trigger and lubed everything up. It came in today and I mounted a scope on it and proceeded to get it sighted in and get pellets down it. Took a bit to get my form back and this thing is going to shoot lights out once it gets all settled in.
I didn’t shoot any over the chrono today but will tomorrow. The gentleman that did all the work said it was shooting 11.7FPE with 8.4gr pellets.
HW97
Athlon Midas Tac 6-24x50 with Sportsmatch one piece mount.
Six 10 shot groups at 25yds with 6 different pellets.
10 dimes at 25yds with H&N Baracuda FT
Then shot a 5 shot group at 50yds and 75yds. As you can see the wind picked up when I was shooting the 75yd plate.
He polished everything thing up installed the kit along with needle bearing , reduced trigger spring, reworked the trigger and lubed everything up. It came in today and I mounted a scope on it and proceeded to get it sighted in and get pellets down it. Took a bit to get my form back and this thing is going to shoot lights out once it gets all settled in.
I didn’t shoot any over the chrono today but will tomorrow. The gentleman that did all the work said it was shooting 11.7FPE with 8.4gr pellets.
HW97
Athlon Midas Tac 6-24x50 with Sportsmatch one piece mount.
Six 10 shot groups at 25yds with 6 different pellets.
10 dimes at 25yds with H&N Baracuda FT
Then shot a 5 shot group at 50yds and 75yds. As you can see the wind picked up when I was shooting the 75yd plate.