Other 177 project suggestions

[Rickstwowheels]

I have an extra Snowpeak bottle adapter valve and I am looking for a way to use it in a build. I have a range of calibers but no PCP .177. Can anyone think of a way to use this in a .177 build since Snowpeak m60s in 177 appear to be unavailable indefinitely?

 

[WorriedMan]

By "Snowpeak bottle adapter valve," do you mean adapter used to fill bottle in, "remove-bottle-to-fill," system via quick-disconnect, the male foster-installed collar (pictured) or some other adapter valve? WM

 

[Rickstwowheels]

By "Snowpeak bottle adapter valve," do you mean adapter used to fill bottle in, "remove-bottle-to-fill," system via quick-disconnect, the male foster-installed collar (pictured) or some other adapter valve? WMView attachment 536073

It looks like the part on the bottom. It was called

M60B/Zelos New Style bottle Valve with Fill nipple and Gauge​

 

[WorriedMan]

It looks like the part on the bottom. It was called

M60B/Zelos New Style bottle Valve with Fill nipple and Gauge​

Paid Wes, at airgunarcheryfun (Canada) $37 to-my-door for one in picture. Loosing bottle air to refill gun when re-installing bottle was not good, especially for air-thirsty .35. Try to sell in Member Classifieds, somebody might feel same as I did. WM

 

[Florida_Man]

Well I don’t think that will work on the PP750, but I am thoroughly enjoying my 177 build. I’m waiting on a block without plenum that will go on this rifle. Dream Notos until then. I think I’m ordering an ergo grip for this one, still debating because finger grooves aren’t my favorite.

 

[JaceSpace1369]

Well I don’t think that will work on the PP750, but I am thoroughly enjoying my 177 build. I’m waiting on a block without plenum that will go on this rifle. Dream Notos until then. I think I’m ordering an ergo grip for this one, still debating because finger grooves aren’t my favorite.

View attachment 536082

You can't just remove the grub screw and unscrew the plenum? I thought the plenum was optional to use.

 

[RabbitofCaerbannog]

Well I don’t think that will work on the PP750, but I am thoroughly enjoying my 177 build. I’m waiting on a block without plenum that will go on this rifle. Dream Notos until then. I think I’m ordering an ergo grip for this one, still debating because finger grooves aren’t my favorite.

View attachment 536082

I cannot wait until them commie chinese finally decide I've been a proper revolutionary and DELIVER MY DREAM REG

 

[RabbitofCaerbannog]

You can't just remove the grub screw and unscrew the plenum? I thought the plenum was optional to use.

i think the grub is for clocking on that model.

 

[Florida_Man]

You can't just remove the grub screw and unscrew the plenum? I thought the plenum was optional to use.

Then it’s a gamble if it will clock correctly, same boat as my regs without the plenum. I have one on the way to Wes and I have one to work on and try myself.

 

[JaceSpace1369]

i think the grub is for clocking on that model.

I remember the screw for clocking, but you can use o rings or shims to adjust for the proper clocking as well no?

Then it’s a gamble if it will clock correctly, same boat as my regs without the plenum. I have one on the way to Wes and I have one to work on and try myself.

Okay, that's good!

 

[Florida_Man]

This is what I’m eventually looking at. This one is about 1/4 turn more to clock correctly. So I’m going to try the route of removing some material on the block.