I finaly did a few shots this evening well after dark.
I mounted the HW35's scope on the HW30, and shot with scope opticaly centered, and the rings at zero moa. Range was 30 yards. It shot 28 MOA low., with .20 cal H&N FTT.
So I raised the moa by putting a 7/64" Allen bit under the ring adjustment and tightened them up.
Now it's shooting 48 MOA high.
That's 76 moa of movement with basicly 1/8" adjustment. That info can give me a target measurement to set the moa as desired, rather than trial and error, (my usual method).
I wanted the FTT pellets ballistic info to compare the trajectories of the (30 in .20), to the (35 in .22). I have the 35's info, but not the 30's. I suspect that they will have comparable drop at 75y.
So I pulled out the chrony and set it up, turned it on and shot five shots, but it never registered a shot then the battery went dead.
I've had this in my mind to do since I got the scope, but I'm thinking that the 35 will be here before I get it done anyway.
I will be shooting PB's with my brother all day tomorrow, so maybe Sunday after church.
