1st (short)video attempt

[Guest]

Hey guys. I just received my Casio ex zr 1000 and my Eagle Vision scope cam adapter. Went out back to try it out. 65 yards. Slight wind.
http://s882.photobucket.com/user/ewright409/media/CIMG2482_zpswornowqd.mp4.html

 

[Ginuwine1969]

Good job, you're pellets are spiraling, you may want to check the speed.

 

[Guest]

How could that be. Jsb 34 grain at 825 fps. No signs of clipping.

 

[Antj]

Didn't really see spiraling maybe a bad Pellet. At 825 that speed is slow enough to definitely not spiral!

 

[Guest]

Hi Antj. I started another thread on this in general airgunning. Pellet spiraling. I've been recording and watching in slomotion and there is spiraling. I took the moderator and endcap off and the groups tightened up a lot, with just a couple pellets with a little wobble. They must be getting damaged a little at the breech end. Any thoughts

 

[Dartagnan]

FastEddie- is the pellet in the video the spiraling you posted about on your other post? Reason I'm asking is because I was imagining a corkscrew spiral. After reviewing this video, it looks more like an odd tumble rather than a spiral. 

BTW your video looks great! Looking forward to your future videos. 

 

[Guest]

Yes. Some pellets are more of a small spiral and some are a wobble. I removed the endcap and the groups were very good, but a couple still had a slight wobble.

 

[Ginuwine1969]

Still, great video keep up the good work. I will have to mount my camera and take some shots when i find somewhere with some distance where i can shoot.

 

[Guest]

Thanks kris. I'll try that.
Thanks Ginuine.

 

[Dartagnan]

Good call kris! Someone on this forum had issues with the pellets being damaged going thru the mags. Don't remember if it were because of the pellet or the oring in the mag. Either way, any physical contact with the pellet need to be checked.